0
How do you replace a delta single handled bathroom sink faucet washer?
Wiki User
∙ 11y ago
It doesn't have a washer, it uses two small cups with springs under them. A repair kit is available for about $4. Shut the water off. Take the handle off. There should be a set screw in the front of the handle at the bottom. May have a cover plug in the hole. Under the handle is the ring or cap that holds the cartridge in. Unscrew this and the control ball that the handle was attached to will lift out ant the cups and springs are in the hole under the ball. Replace both cups and springs with new and reassemble the faucet. The springs may have one end smaller than the other, if so, that end goes up. Check the bottom of the ball for rust. It can build up and tear up the new cup fairly quickly. It should clean off fairly easily. Don't use anything too abrasive as this will leave scratches which will tear the cup also. Baking soda, white tooth paste should do the job.
Wiki User
∙ 11y ago
Wiki User
∙ 15y agoYou replace the spring and caps washers as you would in a Delta faucet
Add your answer:
Earn +20 pts
Can you replace a single hot cold bathroom faucet with a double handled one?
absolutely!
What is the average price for a single hole bathroom faucet?
The average price for a single hole bathroom faucet can range from 80 to 300 hundred dollars. This will depend on the type of fit and design you are looking for.
What is a escutcheon plate?
An escutcheon plate is the round back plate behind your bath tub faucet. usually installed on single handled faucets.
How do you take a single handled faucet off a bathtub?
You have to pop the cap off on the front of the acrylic handle, then under the cap there will be a screw to undo.
How do you replace the valve in a Moen shower single handle faucet The faucet was installed in 2004. When you turn the handle to the left for hot the water stops. Hot water is present in the sink?
Turn the water off to the faucet. Remove the handle. The top of the faucet should unscrew to get to the ball valve. Replace the valve and gaskets then reassemble the faucet.
How do you convert a triple handle shower faucet to a single handle faucet?
No conversion, it would need to be replaced with a single handle faucet.
What does a single hold faucet do in a house?
The correct term would be a single hole faucet. You can not find anything about a single hold faucet on google. Single hole faucets are typically not the first choice of faucets.
If you have a Delta single-handled faucet that is leaking inside the wall and you cannot repair it for now can you just cap it?
No, it will continue to leak inside the wall but if there is a shutoff for this fixture you could use that.
Can you convert a single handle kitchen faucet into a double handle faucet?
Change the faucet, either one will mount on the sink.
Can a single handled faucet with a hot and cold mix be used for a cold water faucet only?
Yes. If you can attach a y to your cold water line, split it and run cold into both cold and hot Hopkins on the faucet.Yes , by blocking off the supply to the H/W side of the faucet and only connecting the C/W UNLESS it is a temperature or pressure balance type.
How does water come out from a tap?
The average kitchen faucet in a house will supply 2.5 -3 gallons per minute at 50 PSI. That is an average hose working pressure in north America. A large bath faucet will supply 3 + gpm and a single lever bathroom sink faucet will be about 2 gpm.
Repair Delta kitcher faucet diverter?
Delta faucet is one of the better brands on the market and if you call their 800 number and give them the model number or type single lever or two handle they will send you the parts and instructions on how to replace the defective diverter
