The timing chain on the SOHC motor is easy to set. First, before you remove the chain, rotate the crankshaft 90 degrees clockwise past TDC (top Dead Center) This lowers the pistons to the middle of the cylinder block so you don't damage any of the valves in the head. Proceed to remove the timing chain. When installing the new timing chain, rotate the camshaft so the mark on the cam gear is at the 12 0'clock position. You can use a 3/16 drill bit to line up the camshaft sprocket with the locating hole in the cylinder head to be sure the gear is in the correct position. Rotate the Crankshaft Counter-Clockwise back to TDC so the mark on the crank sprocket matches the timing mark cast into the block, be sure when installing the chain, all the slack of the chain in on the tensioner side.
It does NOT have a timing belt, That engine has a timing chain and gears.
I need to know where the timing chain is located in a 1988 Olds 98 regency brougham, and how expensive a timing chain is.
The timing is set on a 98 Chevy Silverado 1500 5.7L by aligning the cam sprocket with the timing chain markings. The engine's computer will then make adjustments on the fly for any additional timing changes needed.
chain
Chain
chain
timing CHAIN
It has a timing chain that requires no maintenance.
it has a timing chain and it runs about a hundred bucks thorough nissan.
It has a chain.
98 - 2008 has timing Chain, according to toyota.custhelp.com =p (1997 has timing belt)
It does not have a timing belt. It has a chain and gears.If timing chain goes out then the engine will not run.