0
There are two ways to get turn off the volume with a DISH remote. The remote would need to be addressed to the TV itself. You can press the 'Mute' button which is generally on the top left hand side of the remote, and you can press the volume down button to make it quieter.
Wiki User
∙ 12y ago
Wiki User
∙ 12y agoWhen you press the large red button at the top of the remote, this button turns the satellite receiver off/on. If it doesn't work for you, try changing the batteries. If it still doesn't work, you may need to readdress the remote to the receiver. I have provided the instructions below:
Remote: All Other Remotes
- Go to System Info screen (press Menu 2 times on remote or pressing System Info button on receiver).
- Hold down the SAT button until all mode lights light up.
- Enter a number between 1 and 15 using the numeric keypad on the remote.
- Press the pound (#) button.
- Once the SAT button blinks three times, press record. Note: If successful, the number selected in step 3 will appear in the System Info screen under Remote Address.
Wiki User
∙ 12y agoTo get a code into a DISH remote you have to program it in. Below are the steps to assist you with this. I have included a link in the sources below that will help you to lookup codes for specific models of equipment.
Addressing Remote to TV:
1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if it is working.
5.) If no function, repeat steps 1-4 with another code.
Wiki User
∙ 13y agoUsing your DISH Network remote (has the words DISH Network at the bottom of the remote) press the large red power button on the remote.
Add your answer:
Earn +20 pts
What is the dish network code tcl l40fhdf11ta remote code?
I just found a remote code for my TCL L40FHDM11 tv: 651. It works, but I still have to use the remote that came with the tv to turn it on & off and for volume.
How do you prograre your dish network controller to my Orion tv?
To program your DISH Network remote to your Orion TV you will simply- press and hold the TV Mode button on your DISH Network remote, until all the other mode button back lights illuminate, then release. -Now while the TV mode button is blinking enter in the remote code; 720 which is the remote code for your Orion TV. After entering 720, then press the pound (#) key. -After pressing the # key on the DISH Network remote, the TV mode button should blink 3 times and then turn off completely. This will mean the programming of the DISH remote to your TV has been completed successfully. While still in TV mode try any of the functions on the remote, such as turning the volume up or down on your TV or attempting to press the power button. -The DISH Network remote should now be programmed to control your TV. -If the remote code 720 doesn't program the DISH Network remote successfully you can also try the following using the same procedures, 220, 748, 721, or 062.
Dish network remote switch back to tv mode?
In order to put your DISH Network remote back into "TV Mode," you will simply need to press the clear colored button in the upper left corner of the remote that is labeled, "TV." The button will temporarily light up red & then turn off, after the light goes out you will then have successfully put the remote into TV mode.
Need Dish network remote control code for Dynex DXLL2215A11?
We have 2 codes for your Dynex TV: 720 and 727. I have provided instructions on how to program the remote to your TV.Remotes: Basic (Television Only) Turn the Television On.Press and hold the clear TV button (on the DISH remote) for three seconds until the LED flashes.Enter the three-digit code using the buttons on the number pad.Press #. Note: The LED will flash three times.Test functionality with the TV.Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.
Is there any way to program a Samsung television remote control to operate the dish network?
Some universal remotes can be programmed to work on the DISH receiver but you won't be able to use your Samsung TV remote to operate your DISH receiver. You can program your DISH remote to work your Samsung TV. I have provided instructions on how to program your DISH remote to your TV. I have also provide TV codes.TV codes: 738, 680, 516, 679, 666, 573, 665, 667, 669, and 653Remotes: Basic (Television Only)Turn the Television On.Press and hold the clear TV button for three seconds until the LED flashes.Enter the three-digit code using the buttons on the number pad.Press #. Note: The LED will flash three times.Test functionality with the TV.Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.Possibly, depends on the remote
Remote code for Hannspree tv for dish network?
I have provided instructions on how to perform a power scan, which is another way to find a TV code for the remote.Remote: Basic Remote (Television Only)Turn the Television On.Press and hold the clear TV button for three seconds until the LED flashes.Press and release the red TV Power button.Press and release the Up or Down Arrow on the remote until the television turns off.After the television turns off, press and release the # button.Test functionality with the TV.Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television."I had similar issue that other people posted on for Dish Network remote code however I called Hannspree customer service and gentleman named Shawn told me to use NEC code which is 506 for Dish network and it worked magically. Thanks and others should call Shawn for help as well or try NEC code."
What is jvc tv code for dish remote?
The remote code that will program your DISH Network DVR remote to your JVC receiver (I'm assuming it is also known as a amplifier) will be one of the following codes, (I recommend starting with the first code & if it doesn't successfully program your DISH Network remote to your component then you can try the codes that follow,) 683, 703, 725, or 137.
What is the dish network remote control code for a 37 Westinghouse LCD television?
I have provided the TV remote codes and instructions on how to program your DISH remote to your Westinghouse TV.Remote codes: 500, 719, 659, 670, 672, 674, or 664.Remotes: Basic (Television Only) Turn the Television On.Press and hold the clear TV button for three seconds until the LED flashes.Enter the three-digit code using the buttons on the number pad.Press #. Note: The LED will flash three times.Test functionality with the TV.Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.
What is the dish network code for a Toshiba remote?
I have provided instructions on how to program your DISH remote to your Toshiba TV. Here is a list of more codes that should work with your TV: 631, 617, 635, 615, 667, 590, 771, 744, 680, 683, 688. As you go down the list, the success rate decreases substantially.Remotes: Basic (Television Only) Turn the Television On.Press and hold the TV Power button for three seconds until the LED flashes.Enter the three-digit code using the buttons on the number pad.Press OK. Note: The LED will flash three times.Test functionality with the TV.Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.Ray CaloDISH NetworkA few different DISH Network remote codes for your Toshiba TV that you can try & one should successfully program your remote are, 744, 617, 619, or 595.
Dish network remote code honeywell tv?
I have provided instructions on how to program your DISH remote to your TV. Since we don't have codes for Honeywell TVs, the instructions are for a power scan.Remote: Basic Remote (Television Only) Power Scan:Turn the Television On.Press and hold the clear TV button for three seconds until the LED flashes.Press and release the red TV Power button.Press and release the Up or Down Arrow on the remote until the television turns off.After the television turns off, press and release the OK button.Test functionality with the TV.Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.Try an Avex R6 Universal remote control. I bought mine for $20 at Walmart. You can use your Dish network remote to program the universal. The TV was picked up with the "Quick Set-up Method" or you can use your TV remote to program buttons also.
Direct tv HD box and your remote will only turn it off and turn the volume up and it is a sansui tv?
my direct tv hd remote won't work for changing the channel just turn it on and off and turn the volume up
How do you program dish codes on a element tv?
To control your TV with your Dish Satellite remote, you need to perform a power scan to find your remote code. With your Dish Network remote, follow these steps: 1) Turn on your TV 2) Hold down the 'TV' button at the top of your dish satellite remote (the one that lights up) until all 4 buttons at the top light up 3) Press the large red power button on your Dish remote 4) Press the channel up (on most remotes above the select button in middle) slowly until the TV shuts off 5) Once your Television powers off, press the pound key '#' (at the bottom of your Dish satellite TV remote)
