To place pieces of wood or metal together, it is in a glue stick, to dig up and down dirt from ground, or to lower and raise things
You use a Phillips screw driver on a Philips screw.
To screw screws'!
#4 Screw use a 1/16" Drill #6 Screw use a 3/32" Drill #8 Screw use a 1/8" Drill #10 Screw use a 9/64" Drill #12 Screw use a 11/64" Drill #14 Screw use a 3/16" Drill
ones called a nail the others called a screw. Also you hammer in a nail but screw in a screw. Hope this answer helps. :)
To screw and unscrew things?
A screw clamp is something that is used to put a screw in place. There are hand screw clamps where you use your hand to tighten the screw.
For a basic outline on how to use a screw extractor, you just basically punch the screw before drilling and make a small hole in the center of the screw. Insert the extract and rotate counter-clockwise until the screw is free. For more detailed information, visit http://www.wikihow.com/Use-a-Screw-Extractor
To install a screw, you use a screwdriver to turn the screw until the head meets the surface that you are screwing the screw into.
Absolutely you can use a screw extractor to help you remove a screw that has broken off below the surface and you have no alternative to remove them. Here is a website that walks you through the process. http://www.wikihow.com/Use-a-Screw-Extractor
Just the same as any other screw.
Screw you buddy.
In transcribing medical reports a muc screw is a multi-use compression screw. It is an acronym for a specialized compression screw.