How do you wire duplex receptacle using14-3 wire Also with 14-2 wire The wires are already ran to 15 amp breakers and capped off. i would like to hook them up. Thank You?

Answer 1

Sort of confusing are you using 14-3 just for the receptacle with 14-2 to the breaker or the other way around. Either way doesn't matter since you only need 2 wires and a ground for the outlets. The 14-3 should have Red, Black, White and bare wires. 14-2 should have Black, White and bare. All you need are Black, White and Bare. Forget about the red one. Hook the two outlets together with short jumper wires about 6 inches long. Looking at the outlet with the ground facing down, the bare wire goes on the bottom green terminal. The white wire goes on the left side of the outlet. The black goes on the right side of the outlet. Take the 6 inch jumper wire and go from the left side of one outlet to the left side of the second outlet. White to white, black to black, bare to bare. Connect the wires coming from the breaker to the other terminals on one of the outlets. Power comes in to one outlet and then to the second. If the wires are capped in the breaker box, you only need to connect the Black White and bare ones. Do this with the power off.