0
How many 128 8 memory chips are needed to provide a memory capacity of 4096 16?
Wiki User
∙ 12y ago
64
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What common terminology is used to describe the storage capacity of ram chips?
Memory
How many 128 x 8 RAM chips are needed to provide a memory capacity of 4096x16?
128x8=128 bytes 4096x16=4069x(8x2)=4096x2 bytes; hence, chips required, 4096*2/128=64; ans=64.
Is it true that the number of chips on a memory module corrosponds to the quantity of data being stored by the package?
Not really. A single memory chip has the capacity to store a certain amount of data. Other mempry chips have larger or smaller capacity. Only when looking at a specific chip, then adding more chips increases the overall capacity (but typically also requires additional hardware). In the popular case of RAM modules used for desktop or laptop computers, the module's staorage capacity is not a function of the number of visible memory chips soldered onto the module.
How many 2147 RAM memory chips are needed to configure a 4K X 8 memory?
The 2147 memory is 4096 X 1 bit static RAM. You need 8 chips to form 4K x 8.
What is supporting chip?
In terms of computing, supporting chips are those chips in which provide input/output, serial communications, and direct memory access. Some of these chips include: 8251, 8253, and 8255.
How many lines of the address must be used to access 2048 bytes. How many of these lines are connected to the address input of all chips?
That depends on the memory architecture of the system.if the memory chips are byte wide and not used to create a multibyte bus, 11 address bits are needed.if the memory chips are 32 bits wide, 9 address bits are needed (with the CPU internally selecting which of the 4 bytes it will use).it the memory chips are 64 bits wide, 8 address bits are needed (with the CPU internally selecting which of the 8 bytes it will use.if the memory chips are 4 bits wide, 12 address bits will be needed and the CPU must perform 2 memory cycles per byte that it needs. (yes, I have seen a computer that worked this way!)etc.
Memory chips are normally available as part of what type of card?
Memory Chips almost always come as part of a card called a MODULE. Memory's usually listed with two numbers such as 8*32 or 4*16. The first number represents the number of chips on the module, while the second one tells the capacity of each individual chip, measured in megabits(Mb) or one million bits.
How many bytes of memory on a 128MB computer?
The memory is to be designed so that 16-bitdata can be accessed in one .Two 64K X 8 SRAM chips have a capacity of 128KB.
What memory refers to the RAM chips that are installed on the computers system board and whose sole function is to provide memory to that machine?
The Physical memory, as stated on page 435 Tamara Dean Network+ Fifth Edition book.
After you've installed custom firmwire can you use your normal memory stick?
Yes, the custom firmware is all stored on the PSP's internal chips and memory, you can do what you want with the memory card you used to install it, it is no longer needed, and you can replace it with your regular memory card.
Memory usually consists of one or more chips on this?
Memory usually consists of one or more chips of bytes.
What consists of nonvolatile memory chips that can be used for storage by the computer or the user?
Flash memory consists of nonvolatile memory chips that can be used for storage by the computer or the user. Flash memory was introduced in 1984.
