0
How many BTU are required to raise the temperature of one gallon of water one degree Fahrenheit in one hour?
Wiki User
∙ 16y ago
This is a pretty straightforward calculation. By definition, a BTU is the amount of energy required to raise one pound of water one degree F. But you have one gallon of water, which weighs approximately* 8.34 pounds. So, you'd need 8.34 BTU to increase one gallon of water one degree F. Note how the amount of time was not important. Whether you heat the water slowly or quickly doesn't matter. You will still require 8.34 BTU to raise the temperature of a gallon of water one degree F. * I say approximately because the weight of water varies slightly with its temperature. Water is at its densest at 4 degrees Celsius (39 degrees F). A gallon of water at temperatures above and below that value will weigh less.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
Suppose you have a 2 gallon a 3 gallon and a 5 gallon container Describe how you can use the containers to measure 1 gallon of water in the 2 gallon container.?
1. Fill the 2 gallon container with water. 2. Pour all the water in the 2 gallon container into the 3 gallon container. 3. Refill the 2 gallon container 4. Fill the 3 gallon container the rest of the way with the 2 gallon container. You will have 1 gallon left in the 2 gallon container without using the 5 gallon container. P.S Whose bomb are you trying to defuse?
How can you divide one gallon into 3 containers?
2 quarts and 1/2 gallon
4 q in a g?
4 quarts in a gallon
How many mil in a gallon of paint?
I think the correct answer is 4800 mils in a gallon.
What is 2 cups to 1 gallon?
A gallon is four (4) quarts; a quart is two (2) pints; and a pint is 2 cups. Thus, a gallon is 2 x 2 x 4 = 16 cups, or a cup is 1/16 of a gallon. Thus, 2 cups is 1/8 of a gallon.
If water weighs 8.34 pounds per gallon how much Btu to raise the temperature of 4 gallon of water from 70 degree Fahrenheit to 72 degree Fahrenheit?
what is the answer to this
How much ice to lower the temperature of a gallon of 90 degree F water by 1 degree F?
Depends on the temperature of the ice.
How many BTU are required to lower the temperature of one gallon of water one degree?
No BTU are required in order to lowerthe temperature of water. All you have to dois place the water in an environment that is cooler than the water is, then stand backand watch the temperatue of the water drop while the BTU flow out of it.
What is BTU of gasoline in engine?
BTU is an abbreviation for British Thermal Unit. This represents how much heat or energy is required to increase the temperature of 1 lb of water by 1 degree Fahrenheit. Gasoline, on average, creates between 115,000 and 125,000 BTUs. In contrast, ethanol creates about 75,000 BTUs.
Proper storage temperature for 1 gallon of milk?
The proper storage temperature for one gallon of milk is in the refrigerator with a temperature below 40 degrees Fahrenheit. Do not store the milk on the refrigerator door. Keep it on a shelf where it will stay cooler.
How many watts are required to heat one gallon of water one degree?
2.4705 watts/hour
How many btu per gallon of water?
It takes 8.33 BTU to raise the temperature of water 1 degree F.
What temperature should a 20 gallon tank be for a turtle?
The correct temperature to keep MOST, not all turtles, is at 81 degrees Fahrenheit or 29 degrees Celsius
How many btu does it take to raise the temperature of 1 gallon of water 1 degree if water was already 50 degrees?
U.S.gallon = 8.33 pounds of water. Therefore to raise the temperature by one degree F will require 8.33 BTU. The initial temperature of 50 F is inconsequential.
How many BTUs are needed to heat one gallon of water to 200 degrees?
Assume the water is initially at 40 F and 14.7 psia.m = ( 1.0 gal ) ( 1.0 ft^3 /7.4805 gal ) ( 62.43 lbm / ft^3 ) = 8.346 lbmQ = Delta U = ( m ) ( Cv ) ( T2 - T1 )Q = ( 8.346 lbm ) ( 1.00 Btu / lbm - Fdeg ) ( 200 F - 40 F ) = 1335 Btu
How many BTUs will it take to lower 1 gallon of water 1 degree?
1 BTU = heat corresponding to change in temperature of 1 pound of water by 1° Fahrenheit.Weight of 1 gallon of water = roughly 8.33 poundsHeat corresponding to change in temperature of 1 gallon of water by 1° Fahrenheit = 8.33 BTU.But it doesn't take that, i.e. you don't have to supply it. You're talking about lowering thetemperature, so you're just allowing the water to cool on its own. As it does, it releases8.33 BTU of heat, which you can then collect and take away to use somewhere else.
How long does it take 1 gallon of water to freeze at 32 degrees?
There is no standard length of time that it takes for a gallon of water to freeze. The amount of time it takes for a gallon of water to freeze can vary depending upon many different things such as temperature.
