You need to look at the rating plate on the freezer. My Kenmore upright freezer draws 5.0 A. Look for a number followed by the word amps or something like 5.0 A.
The wattage and the voltage are required for this. Divide watts by volts this will give you the amperage
Two and a half to three amps
Watts = Volts x Amps for an incandescant bulb. So Amps = 600/120.
To answer this question the voltage of the generator is needed. I = W/E. I = 40000/Volts
Power equals voltage times current in amps. The value of amps used is needed to do the math.
To obtain the amperage from 2000 watts the voltage is needed. I = W/E. Amps = Watts/Volts.
To answer this question the pump's voltage is needed.
You cannot increase voltage by adding amps.
Watts = Volts x Amps for an incandescant bulb. So Amps = 600/120.
To answer this question the voltage of the generator is needed. I = W/E. I = 40000/Volts
Voltage X amps = wats 120 volt freezer drawing 2 amps is 240 watts running note it can take up to 3 to 4 times that to start. you have rla run load amps then you have LRA Lock rotor amps (what it takes to start)
To answer this question a voltage value must be stated. Divide the voltage into 50 KVA and your answer will be in amps.
Power equals voltage times current in amps. The value of amps used is needed to do the math.
To obtain the amperage from 2000 watts the voltage is needed. I = W/E. Amps = Watts/Volts.
3 things Volts, ohms, and amps
Mpre information is needed to specify the question more accurately.
2,4789
To answer this question the pump's voltage is needed.
Depends on how many, and what electrical appliances you have. If you are on 110volts, the current (amps) at any time are the kiloWatts you are running times 1000 (=watts) divided by 110