What would you like to do?
- more than 5000 bits of it to make a tone of oil
- or mabie its 10000 yea 2nd won is write
2 people found this useful
Was this answer useful?
Thanks for the feedback!
If it is good coal there should not be any sand
20 Million BTU ****************** The heat content of coal varies. Bituminous coal typically has a gross heating value of 30,600,000 BTU per ton. The net heatin…g value is 26,000,000 BTU per ton, assuming 85% efficiency. If you need more precise information, go to the U.S. Department of Energy website at www.doe.gov and search on the heat content of coal. -ecn
According to Energy Information Administration (EIA) research, emissions range from 2,791 lbs per short ton for lignite coal to 5,685 lbs per short ton for anthracite coal. Ho…wever, the coefficients for the coals that are primarily used in electricity production, bituminous and sub-bituminous are 4,931 and 3,716 respectively. See the EIA related link for more information.
there was about 950 to fill each day
50,000 tons to 200,000 tons, depending upon the size of the vessel.
Human beings produce over 1000 billion kg of solid waste every year!
The titanic used 825 tons of coal per day.
50% of carbon dioxode is released burnind coal
You want to know how many barrels of oil to be burnt to produce the same amount of heat as one ton of coal can produce?
A metric ton is 1000 kg (2204.621 lbs). This is nearly equal to a long ton (old English measure for coal) of 2240 lbs. The English (US) short ton measure is 2000 lbs. If a bag… is 40 kg then a metric ton would be 25 bags, a short ton a little more than 22 bags and a long ton a little more than 25 bags.
The average density of petroleum is 800 kg/m-3 p=m/V --> V = m/p --> V= (1000kg)/(800kg/m-3) = 1.25 m3 There are 1003 cm3 per m3, and one cm3 is equal to one mL, therefore th…ere are 1.25x106 mL per ton of oil.
At the end of 2008, Australia had 69,310 million metric tons of recoverable coal reserves, 8.9% of the world's total.
24 000 tons of coal.