What would you like to do?

# How many tons of coal does it take to produce a ton of oil?

# How many cubic yards of sand in one ton of coal?

If it is good coal there should not be any sand

# How many gallons of oil in a ton?

318 gallons, but I will be using the round number of 320 gallons.

# How many tons of limestone does it take to produce one ton of cement?

Answer .
It takes between 3200-3500 pounds of raw material to make one ton of cement, the bulk of the raw material being limestone. Let's say the ratio is 1.5 tons limeston…e for every 1.0 ton of cement.

# How many BTU per ton of coal?

20 Million BTU.
.
The heat content of coal varies..
Bituminous coal typically has a gross heating value of 30,600,000 BTU per ton. The net heating value is 26,000,000 BTU pe…r ton, assuming 85% efficiency..
If you need more precise information, go to the U.S. Department of Energy website at www.doe.gov and search on the heat content of coal..
-ecn

# How many kilowatthours are produced by 1 ton bituminous coal?

Coal has an energy value of 24 Megajoules/kg, which is the same as 6.67 kwh/kg. However a coal fired power plant will only have an efficiency of about 30 per cent so this redu…ces to 2.0 kwh/kg. Now when you say 1 ton, do you mean 2240 lb, 2000 lb, or 1000 kg (metric ton) ? I will assume 1000kg as it makes the arithmetic easier, in fact 2.0 kwh/kg comes to 2000 kwh/metric ton. Note that kilowatt is a power, kilowatthour (kwh) is an amount of energy, which is what you wanted. If you want it for a short ton of 2000 lb, this will become 1814 kwh, and for a ton of 2240 lb it will be 2032 kwh

# How much carbon dioxide does a ton of coal produce?

According to Energy Information Administration (EIA) research, emissions range from 2,791 lbs per short ton for lignite coal to 5,685 lbs per short ton for anthracite coal. H…owever, the coefficients for the coals that are primarily used in electricity production, bituminous and sub-bituminous are 4,931 and 3,716 respectively. See the EIA related link for more information.

# How many tons of coal did the titanic need each day?

there was about 950 to fill each day

# How much so2 is produced from burning one ton of coal?

50% of carbon dioxode is released burnind coal

# How many tons of coal does a train car hold?

2 tons No. A modern coal car carries 120 tons of coal. Some older onescarry 100 tons. On the B&O division of CSX, coal trains areusually 80 or 120 car unit trains. The length …of the train isusually governed by the size of the originating or destinationyard.

# How many bags of 40kg coal in a ton?

A metric ton is 1000 kg (2204.621 lbs). This is nearly equal to a long ton (old English measure for coal) of 2240 lbs. The English (US) short ton measure is 2000 lbs. If a bag… is 40 kg then a metric ton would be 25 bags, a short ton a little more than 22 bags and a long ton a little more than 25 bags.

# How many joules does one ton of coal produces?

4 joules = about 1 ton of coal

Answered

# How many pounds of CO2 in one ton of coal?

Assuming that coal is essentially pure carbon, each 12 kg of coal will combust to form 44 kg of carbon dioxide (C+O 2 -->CO 2 ) a bit more than 3 times as much carbon dioxide… as coal. A ton of carbon will burn to form about 3 tones of carbon dioxide.

Answered

In Australia

# How many metric tons of recoverable coal does Australia have in reserve?

At the end of 2008, Australia had 69,310 million metrictons of recoverable coal reserves, 8.9% of the world'stotal.

Answered

# How many tons of coal do you need to do 200 megawatts?

24 000 tons of coal.

Answered

# What is heavier- a ton of feathers or a ton of coal?

Those two items are equal in weight. Each weighs exactly 2,000 pounds.