answersLogoWhite

0


Best Answer

A blown head gasket on a 94 Ford Crown Vic is fixed by removing the cylinder head, cleaning the gasket surface, and installing a new gasket. The head gasket is extremely important as it prevents oil and water from mixing and contains the vehicle's combustion.

User Avatar

Wiki User

9y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

14y ago

If you have to change one side, you might as well change the two. Its about 12 hours labor, plus a valve job at around 200 to 300. bucks per side, as long as there are no parts to replace, plus you will need a gasket set. It all depends on where you pay your labor, friends are the best bet.

This answer is:
User Avatar

User Avatar

Wiki User

13y ago

usually somewhere around 3 to 400 dollars depending on what motor you have. Sometimes a little more on the SOHC 4.0 a little less on the OHV 4.0

This answer is:
User Avatar

User Avatar

Wiki User

13y ago

how much money for labor to replace a head gaskets 1998 ford expedition v8 engine

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How much money for labor replace a head gasket 1998 ford expedition v8 engine?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Art & Architecture

Labor cost replace intake gasket 2001 SC2 Saturn?

High idle condition is often the intake gasket on this engine. The 'book' on this is about $400 labor.. Probably could do it at home, but it's a lot easier to get to if you tilt the motor forward. We paid to have it done :( High idle condition is often the intake gasket on this engine. The 'book' on this is about $400 labor.. Probably could do it at home, but it's a lot easier to get to if you tilt the motor forward. We paid to have it done :(


What is the cost to replace head gasket for 2005 Ford 6.0?

My '01 Focus just blew its head gasket. The mechanic quoted me at $1200. At ford Dealer ship? Yea have fun spending that kind of money. The gasket itself you can pick up for 30$ max. Find someone who knows even a little about a car, and they will prolly do it for 50$ and a six pack of beer. My friends have replaced a head gasket on a civic and its really easy if u know what your doing.


How much to replace bad piston rings?

You are talking about an engine overhaul. It could run thousands, parts and labor, depends on the year, make and engine.


What ls labor cost for head gasket on 99 Lincoln navigator with 5.4l?

People advertise on Craigs that will do it for a few hundred- many do head gaskets only. about half what a dealer would chaarge. A gasket is only 35.00 but it is a lot of labor, it could easily take a full day or even a weekend. If head needs milled because it is warped will be a couple hundred more.


How much does it cost to replace an oil pump?

Oil pumps can cost from $80 to $200. It all depends on which vehicle you have.

Related questions

How much does it cost to replace an oil pan gasket on a 2006 impala?

about $600. Std. labor estimate is 5.47 hours to lift engine, replace gasket, replace engine and realign steering.


You have oil all over the right side of your engine and you think it's a head gasket issue what do you think?

It may be a valve cover gasket, which is far less labor intensive to replace.


Labor charge to replace a intake manifold gasket on a 99 Chevy Tahoe?

The labor charge to replace and intake manifold gasket, on a 1999 Chevrolet Tahoe, is approximately $180. It takes approximately 2 1/2 hours to replace the gasket.


What is better to fix the head gasket or engine swap?

If all that is wrong is a blown head gasket and even a cracked head it is much easier and cheaper to just fix it than to replace the engine. The labor to replace the engine plus the cost of the engine would be far greater than fixing the one you now have. This is assuming the engine is not worn out already.


What is the labor time esimate to replace the engine oil pan on a 96 mystique 2.0 ztec engine?

all that is needed to replace an oil pan is to remove the bolts holding it on (5-10 min) scrape the old gasket from engine block (10-15 min) and but new pan and gasket back on (5-10 min)


How do you replace a head gasket for cheap?

There is only one way to replace a head gasket and it is never cheap. This is a major repair and 90% of the cost is labor.


How much labor to replace engine in a 1984 Chevy c60?

labor time to replace engine in a 1984 chevy c60


How much labor to replace a head gasket on a DIESEL caterpillar engine?

Well i just replaced a head gasket on an old d4 today and it took about 4 hours if that helps depends on how much your mechanic charges an hour...


What is the cost of labor to repair a head gasket?

They only Head Gasket I had to replace was on a Chevy Malibu 1999. Cost me about $1400


Labor cost replace intake gasket 2001 SC2 Saturn?

High idle condition is often the intake gasket on this engine. The 'book' on this is about $400 labor.. Probably could do it at home, but it's a lot easier to get to if you tilt the motor forward. We paid to have it done :( High idle condition is often the intake gasket on this engine. The 'book' on this is about $400 labor.. Probably could do it at home, but it's a lot easier to get to if you tilt the motor forward. We paid to have it done :(


How do you replace the valve cover gasket on a 1990 Honda Accord?

How much does it cost parts and labor to replace a valve cover gasket on a 1990 Honda Accord 4door.


How much should it cost to replace a 1996 oil pan gasket?

One hour of labor (~$75) + the gasket (~$15-25).