Average Bathwater should be between 101°F or 38°C to 106°F or 41°C.
Considering that the average body temp of a man is 98.6°F or 37°C. then the average bath water should be between 101°F or 38°C and 106°F or 41°C.
As a young male Caucasian 18 year old, I used to go to a Country Club Type Spa and they had what they called a Mineral bath. It was set at 113°F or 45°C. and you were only allowed to be in that water for no more than 3 mins. at a time for health reasons.
So taking this data into consideration, I would say that any bathwater over 106°F or 41°C for long periods of time should be avoided due to health reasons.
roughly about 80 Litres.
3 galons
The bath filler waste is directly connected to the trap and overflow water is supposed to drain there -it is not a leak.
How many gallons of water a 10 min bath takes depends entirely on how much water is put in the bathtub.If 80 gallons are wasted in a 20 min bath, im guessing you waste 40 g in a 10 min bath
things that get flushed down the toilet sink bath all of that.
- do not waste water - do not bath every day
- do not waste water - do not bath every day
If you take a bath too long, you will waste water. Letting water run while brushing your teeth.
Hot water goes into the sink or bath to be used, then flows down the drain like all waste water.
In US 90% of water gain by ground water and it distributed as 31% waste in toilet and 21% in bath ,27% in washing waste daily.
around 150L
if it's going to the body then it's not waste.
Because to fill up a bath you need to use a lot of water, this water is more then what a typical person would use to shower (showers use less water/min then filling up the bathtube)
dont give your gerbil a 'water' bath use chinchilla dust