How many cups of water can fulfill a bathtub?

Answer 1

It depends how big it is and how deep you fill it.

A:Get a bucket that you know the size of (normal buckets hold up to 4.5 gallons (18 liters)). Next time you fill the bath, fill it bucket by bucket. Then you will know how much water you have used.

You can measure the shower in a slightly different way. Count how many seconds it takes to fill the bucket. Then time your normal shower. If it takes 60 seconds to fill a 5 gallon bucket and you take a 4 minute shower, you will use 20 gallons of water for your shower. That's a lot of water!

A:According to the BBC Website, a bath can hold 80 litres of water. A:

• How many gal tub is it!
• Or what size in inches is it,
• Length 3-1/2' ?
• wide 2' ?
• water depth 1' ?
• If so then some where < then 50 US gal

A:Apparently, when comparing a bath to a shower, a bath is much more wasteful. To try it out, plug the drain and run the bathwater for 10 minutes (enjoy the bath). Next time you have a shower plug the tub and see how much is in the bottom after 10 minutes. A:The dimensions of a standard size bathtub are approximately: two feet wide, four and one-half feet long, and one foot deep. Simply multiply as follows to find the tub's volume in cubic feet:

2 x 4.5 x 1 = 9 cubic feet.

Now one (1) cubic foot of space will hold 7.48051945 gallons of any liquid, so to find the tub's volume in gallons, one must simply multiply this decimal by its volume in cubic feet.

The answer is as follows:

9 x 7.48051945 = 67.3 (rounded to the nearest tenth)

Therefore, a bathtub with the dimensions described above will hold about sixty-seven gallons of water when completely full.

A:35 to 40 gallons for typical tub A:The average bathtub will hold 40 to 60 gallons when completely filled. A:Depends on how big the bathtub is but average bathtub size is about 80 liters A:Typically data on water conservation use a bathtub volume of 25 to 340 gallons for comparison with showers. Larger jetted tubs (whirlpools, jacuzzis, etc.) exist but these would be special cases.

Answer 2

It depends on the size of the "cup" you're using, the size of the bathtub you're trying to fill, and what you consider "full."

If you bathe with 15 gallons of water, then you would multiply that by 16 to get the number of 8-ounce cups, and you get 240.

Answer 3

It depends on the size of your tub I say it's between 10-15gallpns

Answer 4

The average volume of a bath is 150 liters.

Answer 5

Different people use different amounts of water.

Answer 6

To fill a bathub it takes 50 cups of water

Answer 7

If you have an average north American bathtub you can have an adequate bath in about 25 US gallons of water.

Answer 8

It depends what size it is.

Answer 9

a lot!!!!!!!!!

Answer 10

That is approximately 181,437 ml.