Start with an almost full and fresh water tank. Turn the water heater off and let the water cool. Dilute 1/4 cup of household bleach for each 15 gallons of tank capacity in to a gallon of water. Add the chlorine or water solution to the water tank. (Do not pour straight bleach into the RV fresh water tank. ) Let the chlorinated water run through them for 1 or 2 minutes one faucet at a time. You should be able to smell the chlorine. Make sure you are using the water pump and not an external water supply. Top off the RV fresh water tank and let stand for at least three hours over night is better. Drain the system completely by flushing the faucets for several minutes each. Open the fresh water tank drain valve to speed up emptying the tank. Open the hot water tank drain plug and drain until it is empty. Close all valves and faucets and drain plugs. Fill water tank with fresh water. Flush each faucet for several minutes each repeating until the tank is again empty. (Make sure you are using the water pump and not an external water supply.) Fill the tank again. The water should now be safe to drink but if the chlorine odor is too strong you can repeat the fresh water flush. Your RV fresh water system should now be safe to use.
A filter...
SOAK IT IN BLEACH WATER
185
cook it to a boil
Brushing your teeth, gargling some mouthwash, and rinsing your mouth out with water mixed with salt are good ways to sanitize your mouth!
To sanitize a drinking fountain, you can use a bucket of water and add some bleach to it. Use this mix to wipe down the water fountain. Cleaning of a water fountain should be done every week.
Bromine is an additive that you put in a pool to sanitize the water. Chlorine is an additive that you put in a pool to sanitize the water. Salt is added to some pools to allow it to be converted electronically to chlorine with a salt water chlorinator.
No. A dishwasher will not sanitize dishes unless the option is turned on. A normal cycle will use very hot water to wash and itβs good enough. A sanitary cycle heats water to 170 degrees. You should have a good reason to use this cycle.
why do temperatures to sanitize differ
water is naturally dirty, which is why we have kettles to sanitize it for us to drink Clean water is water that has been filtered/boiled
Adding a diluted solution of Chlorine to the water should sanitize it and rid it of the bad smell
Keep in mind that sanitize and sterilize are two different things. Sanitizing isn't suitable for a new piercing, only sterilization. Anyways, you can use alcohol or boiling water. Like I said, if this is for a DIY piercing, it greatly increases the risk of infection if you only sanitize it.