How to turn on a Philips tv without a remote control?
You have to have a remote
5 people found this useful
How do you unlock a used Philips TV model number 21pt445705 without using a remote that was bought in Tanzania?
press volume up and volume down at same time on set tv will turn off and when you turn back on your problem will be gone
I have a Philips universal remote control. Can anyone please tell me the code for setting my Curtis Mathis televisions?
\n. \n CURTIS MATHES ............ 002, 103, 112, 502, 506, 512, 601, 701, 704 Note : with some Philips remotes you must enter a 4 digit code so just add a zero before entering any of the numbers above. That's what worked for me. Enter like that: 0002, 0103, 0112, 0502, 0506, 0512, 0601, 070…1, 0704.\n. \n. \n. \n Code Entry Instructions 1) Press and hold the Setup button until the red indicator stays on. Release the button. 2) Press and release the desired mode button ( TV, DVD , etc.). The red indicator blinks once, but stays lit. 3) Enter the 3 digit or 4 digit code. Note : after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes. 4) With your device on, press CHANNEL UP . If the device responds, no further programming is required. Note : If some buttons do not operate your equipment, try one of the other codes for your brand. Hope it works! (MORE)
The remote control can cause tension in households over who gets tocontrol the television. It also allows people to be more lazybecause they no longer have to get up to change the program.
The first TV remote control, called "Lazy Bones," was developed in 1950 by Zenith Electronics Corporation (then known as Zenith Radio Corporation). Lazy Bones used a cable that ran from the TV set to the viewer. In 1956, Zenith's Dr. Robert Adler suggested using "ultrasonic's," that is, high-frequen…cy sound, beyond the range of human hearing. He was assigned to lead a team of engineers to work on the first use of ultrasonic's technology in the home as a new approach for a remote control. (MORE)
The first wireless TV remote control was invented by Eugene Polley.It was invented in 1955 was called the 'Flashmatic.'
It's based on light. Infrared light to be specific. The remote sends pulses to the TV which is decoded by the computer chip inside to perform whatever function that matches the pulse code from the remote. Many newer models will use radio frequencies to do the same functions allowing the user to use …it without direct line of sight. (MORE)
That's what those control buttons on the front, top, bottom or side are for. On/off, volume, MENU, etc. If you can't find them, then chances are that they're hidden behind a door for design, but all TV's have 'em.
I've a SAMSUNG THUNDER 21" CRT TV model no-CS-20D3S2X/XTL. I WANT TO KNPW THE CODE OF MY REMOTE CONTROL, WHICH IS LOSSED. PLS PROVIDE THE DETAILS CODE . .
I have no idea how old this is but for people who come here in the future if you lose the remote nothing you do seems to change it to game mode. Just invest in a inexpensive vcr hook up the coax to your output to tv hook up w/e audio video cords you have to the back of the vcr and enjoy not having t…o buy a stupid remote for a cheaply made tv with no input button ffs (MORE)
I was able to get my two LG tv's to work using a Goldstar code 1018 (power, volume and mute). Apparently LG used to be Goldstar. Mine was using a Cisco tv remote control unit.
I have a cosmotech tv and it uses the same remote codes as a VIZIO tv. I recently got a Vizio blu-ray player as well and the remote said that it will work with a VIZIO tv only, and it worked with my cosmotech TV.
My television model number is not listed on direct tv. How do Iprogram the remote to control my television
lost the guidebook with the codes for all the different tv brands i need a code for sanyo tv Thanks.
One of these codes should work: 0031, 0107, 0164, 0004, 0009, 0044, 0054, 0000, 0342, 0003, 0125, or 0015.
You know, all TV's have a set of manual buttons on them somewhere. Try looking under the little door on the front if you don't see any. Find the user's menu and rescan the TV or just use the channel button to manually change the channel.
A few different DISH Network remote codes for your Philips TV that you can try & one should successfully program your remote are, 566, 770, 777, or 565.
Try these codes: 525, 566, 651, 652, 655, 656, 671, 690, 723, 724, 729, 770.
There are four different remote controls for DirecTV. I am unable to find the code that you are looking for but there is a search feature you can use. I remember I needed to do this with one of my devices. This should work on all of the DirecTV remotes. Here are the steps: Set the MODE switch …to TV. Hold "Mute" and "Select" until the LED light blinks twice. Enter "991" followed by "1" (telling it your looking for a Television) Press "Channel Up" and then try the volume control. If it works press "Select". If not press "Channel Up" again (to go to the next code) and try the volume again. Keep repeating this process until you find the code that works with your TV then press "Select". [Parts of this answer were taken from the DirecTV website to ensure accuracy] (MORE)
Try 0054. Let me expand my answer to be a little more helpful. Some remotes need a 5 digit code, some need a 4 digit code. Above is a 4 digit code, The 5 digit code would be 10054. Some remotes automatically put in the 1.. Bearing that in mind, I have found more sylvania codes: I will give the 5 d…igit version and you can try them both by dropping the first 1 from the front:. 10054, 10030, 10171, 10020, 10028, 10065, 10096, 10381, 11271, 11314, 11394, 11931, 11944, 11963. These codes are determined by the TV, not the remote, so you can enter them into any programmable remote (You know, so your DVD remote can also operate your TV (MORE)
Remote controls use infra-red light to transmit signals to the television. Electronic components in the hand control convert the button pushes into a stream of pulses that are fed to an infra-red LED. The pulses are received by a sensor in the television and decoded into an instruction. If the tel…evision is in standby mode, the control circuit remains powered in order to receive and interpret the command to turn on the television. Although the power used to run the control circuit is very small, it still draws current all the time. If the television won't be used for a long period of time, it is worth turning the television off at the main power switch to save electricity. (MORE)
Press the power switch at the side of the tv. This will put it into stand-by, with the blue power light visible at the front. Using the buttons on the side of the tv, press CH+/- to turn on, then just use these buttons to navigate to the channel you want to watch.
The Symphonic televisions usually all have one code to transmit the signal to the Philips Universal Remotes. The normal code that works for most of them is 4827-1593.
I am not sure what model of LG plasma TV that you have, but you will probably find the remote instructions for the remote that you have at: . http://www.remotecentral.com . This website hosts remote control codes for almost all universal remote controls.
How to unlock the front panel lock on an RCA 27v520t tv with no remote?
I found an RCA universal remote that works, but it needs to be the long one that has 325 codes.The code is 12352. It does not work on the short stubby RCA remote. Hope this helps.
I know this tv can be programmed with just about any universal remote or cable remote the onoly problem I've come across is once i programmed the remote and tv if i try to turn the volume up or down the channel goes up or down
The timer might be engaged. look into the menu for a timer setting and turn it off.
The codes relate to the tv set and not the remote. Google the set or sanyo and you will get the code. You then need a universal remote to programme to that code or the instructions for the Philips remote to see if that can be reprogrammed. Again Google Philips and the make.
It would depend on the model of the remote, the large majority can and when searching for the model number of the remote, some have 2 model numbers associated with them. If you can't find a number, there are web sites with 1000+ pictures to compare and using their filters you can narrow your search …fairly quick and they have pdf forms with user guides and codes. I always start my search at _ _ _ _ _ _ _.com Also keep in mind if the remote is of an earlier year, say 3-5 years ago, it may not have a code available as I have found many code sheets only list what was available at the time of printing and they seldom upgrade their list. I see the manufactures offering more features that require more circuitry, more buttons and nicer features that include learning, backlit, glow in the dark buttons and even a searching tone for when you just can't remember where you placed it or it fell under the cushions or was folded into the covers (MORE)
i have a 2004 rca tv 32v550t and its asking me for a password but we never had a password for it
The type of waves used in tv remotes are IR waves, otherwise known as infrared waves.
how do i unlock my TV (Maxent 42' TV ) do not have a remote. Menu does not apperar volume is full blast channels dont change HELP
In earlier days, remote controls wre based on ultrasonics (sound frequency above the audible range of frequencies). The controlling circuitry included a hand held transmitter 9that transmits ultrasound) and a TV-based receiver circuit. Electronic filter and stepper motors were used to allow/select c…ertain frequencies and perform various functions depending on the key pressed. But the recent remote controls use infra-red(IR) rays and a special binary (0 and 1) coding mechanism. The code, intensity and wavelength of the IR wave, help to select different functions. Depending on the key pressed, a signal is sent out by IR source say, an injetion laser diode(ILD). It generates a code in parallel format. This is converted to a series format by s shift register. This signal is received by photo-sensitive devices such as an avalanche photo diode at the receiver. Here another shift register is used to convert the code back to a parallel form. This operates a one-of-n decoder, which selects one function from a set of "n" predefined functions and executes it. (MORE)
It Depends What TV You Have. If You Have An RCA TV, Buy A RCA Remote Control For Around 5-10 Dollars. Hope This Helps. RCA Was Only An Example.
The first remote intended to control a television was developed by Zenith Radio Corporation in 1950. The remote, called "Lazy Bones", was connected to the television by a wire. A wireless remote control, the "Flashmatic", was developed in 1955 by Eugene Polley. It worked by shining a beam of light o…nto a photoelectric cell, but the cell did not distinguish between light from the remote and light from other sources. The Flashmatic also had to be pointed very precisely at the receiver in order to work. (MORE)
you turn it on by using the controller. yea man ya dun worriey bout a ting man ya will find eh way man
With today's Technology, Pretty Much anything. It just sends a Infer Red signal to the Receiver in the TV that you have and Presses the Command you pushed on the Remote Control. It can have a tough screen on it, it can Channel surf, it can go onto the Internet, play games, etc. It all depends on wha…t TV you have. Hope this Helped. :) (MORE)
I'd say its still called a television! Televisions came out for a long time without remotes. Now you can get universal remotes to suit all TVs.
I have provided the remote codes for your Sanyo TV and instructions on how to address the remote to your TV Remote codes for Sanyo TV: 590, 683, 589, 090, 591, 111, 652, 542, 987, or 692. Address remote to TV: Remotes: Basic (Television Only) . Turn the Television On. . Press and hold th…e clear TV button for three seconds until the LED flashes. . Enter the three-digit code using the buttons on the number pad. . Press #. . Note: The LED will flash three times.. Test functionality with the TV. . Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television. (MORE)
There are many different brands of universal tv remote controls that are reliable. The best way to find a reliable controller is to read the reviews that people summit.
On your philips controller look for Code search. Once you find it hold it down intil the red light is solid. Once it is turn on the TV and start pushing the power button on the controller. Notice that the light will blink because it is searching for a TV. It should work if it dose'nt contact me at D…email@example.com (MORE)
When you get the screw driver you unscrew the car and there will be a battery inside after you get the battery you go to the t.v remote and put the battery inside then you press the green button.
unfortunately you can't. I have the same problem, moving house, i lost it. i gaffed around for a long time, but in the end, after scouring the depths of the tinter web and a few calls to phillips, they told me i could either purchase another remote from the at Â£19.99 (GollyGosh) so instead i took… me off to telcos and picked up a cheap universal remote and it worked oki doki! (MORE)
Your best bet is to go directly to the manufacturers website. You will need your TV model number which can be found on the Television itself, or on your manual. Link is posted in related links (located below):
The remote codes for a samsung TV are 505, 506, 516, 523, 526, 566, 573, 612, 627, 647, 652, 653, 654, 655, 656, 658, 659, 664, 665, 667, 669, 670, 679, 680, 704, 717, 730, 738, 755
The first thing you should do is call the front desk and ask for a remote. You could also just go up to the television and turn the power button on.
Try using your arrow up button on your TV and scroll above channel 3; most televisions will list your inputs below channel 3. You may also have a source or input button on your TV. I would also go to the manufacturers website and look for a manual for your TV model as each is a little different (The… model number is usually listed on the back of the TV). (MORE)
No, you can buy a remote control to turn power on and off. Good electrical retail outlets sell these. What you should take into consideration is the rating for the power to be switched. Most air conditioner units use a lot of power. The remote control unit will state on the safety label how much pow…er it can safely switch. (MORE)
The top codes available for a Philips TV are: 566, 722, 824, 627, 747, 770, 892, 501, 828, 723.
Universal remotes need to be programmed to the T.V. in order forthe remote to work on the T.V.