If you have air inside a water heater you have major problems as the air can become compressed to dangerously high levels and now instead of a heater you have a powerful bomb.. CALL A Licensed MASTER plumber ASAP
By use of an automatic bleeder valves using nonferrous metals and approved fro the higher working pressures
Hot water tank needs bleed of air,
air lock in hot water pipe
The hot water tank might be undersized for your usage.
Most are rated for 125 psi.
do they help with hot water tank replacement
how long does it take for hot water after lighting water tank its gas?
A hot water heating systems water pressure should be 12-25 psi , the air in the expansion tank should be set around 10 psi but can only be accurately tested with no water pressure against it. Usually u can tell if the tank is bad when the relief valve on the boiler starts releasing water
Open hot water on a faucet. Air will come out instead of water until air is all out, then water should flow as normal. May need to install expansion tank to take care of excessive air pressure build-up in water line.
No, a hot water tank heats water by itself.
So the steam can rise from the boiler to the hot water tank storage
No, a hot water tank heats water by itself.
You will get warm instead of hot water. There is a tube inside the tank on the cold side that goes to the bottom of the tank and the hot comes directly from the top. Reverse them and you are going to get the cold water that settles to the bottom of the tank. It will not hurt the tank or anything, it just makes for poor hot water.