0
add acid
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
What happens if too much baking soda is put in pool?
The pH increases, as will the alkalinity.
Add acid in pool?
acid is added to a pool when alkalinity is too high. Take a sample of pool water to your pool shop and have it tested by them. they will tell you what is required.
What would cause the total alkalinity not to increase in pool water?
If you are using small or jumbo tabs that may contribute to the problem. You will need to add baking soda to raise the levels into the range in which your kit can detect. Use a digital meter to determine alkalinity the range. Your range should be 80-120 ppm. Or you could be adding too much acid. Get a sample of the water to a pool store soon. k
What happens when the alkalinity is too low in a swimming pool?
The water becomes aggressive and attacks anything with which it comes in contact. Not a good environment for the pool finish or the equipment.
Can you swim with high pH levels?
Yes, It will just make your skin itchAnswer:Lower Your Pool AlkalinityYou want to run your pool water alkalinity level between 80-100ppm, not up to 150 as some may suggest. Most pools guys get their info. on how to balance pools from your local water company. Yes, this is correct. It's called the Langelier Index, which was originally designed for public water systems. This index was never intended for pools.In the 1950's, when pools started to come into the mainstream, this was the only index available, so it was used to balance pools and hot tubs.The Hamilton Index, which I use, is much more pool-friendly and is specifically designed for pools. It takes into consideration acid rain, drag-off, heat, the sun, organic and inorganic matter in the pool, etc...While I don't completely agree with the Hamilton Index, it is much closer to how a pool should be balanced and will save you much time and money in the long run.Higher alkalinity levels (120ppm or above) can be reduced using pool acid. There are mainly two types of acid:liquid hydrochloric acid (muriatic acid)dry acid (sodium bisulphate)Take care when using acid because it may affect your pH.While your filtration system is off and the water is motionless, stand in the deep end and slowly add (don't dump the product or go too fast), the pool acid,or alkalinity minus if you wish, into the pool. Please remember to use goggles and heavy rubber gloves. If you spill any acid on your skin, it will probably eat through 3 layers of skin before you can wash it off. Remember, safety first.Allow the water to sit for 2-3 hours, then fully circulate, usually 4-6 hours, then re-test your pool's alkalinity balance.Using the proper chemicals and proper techniques will allow for better results.You can go to the link below for a full chart on lowering your alkalinity.
How do you lower alkalinity but not change pH in a swimming pool?
Initially, you can't. What you do to lower alkalinity is first lower the pH to under 7.2, but not lower than 6.9. Then you aerate the pool, by creating bubbles with your brush, or by running a water feature, if you have one. This will lower your alkalinity. Maintain this lower pH and aerating until you get your alkalinity where you want it. Then retest your pH. If it is now too low, you add Mule Team Borax, say a 1/4 a cup, and then retest. The borax will raise your pH without raising your alkalinity. See the poolforum.com for more help if needed.
Baking soda was added to my pool and ever since the pool is still cloudy even after shock treatment. It is also sudding up What is wrong?
I know the whole key to keeping a pool clean is balance. PH and alkalinity affect the chlorine, chlorine affects the PH and alkalinity. Get and keep the PH and alkalinity balanced and the rest should be easy. If the PH is too high chlorine will no work. Why was baking soda intorduced? Key to cloudy water is filtration along with proper chem. balance. Extend the run time on the pump by8 to 12 hrs and within a day you will see why you have extended the run time.
What can you do if your swimming pool has too much cooper?
Cooper or coPPer ? Too much cOOper , then ask Cooper to get out of the pool !!
Foam in a baquacil pool?
Foam in a pool that uses Baquacil can have a leak in return hose. It can also be the result of putting too much product in the pool. You should check the chemical levels in the pool.
What do i do if Ph is low alkalinity is low chlorine level is fine in pool?
add some form of alkalinity booster for sure. bring it too about 110ppm, chlorine has a naturally high pH, but the higher alkalinity addition will stop acidic compounds from attacking the pH any further. depending on how low the pH is though you may have to add a pH booster, take your water into a pool shop for an in depth water analysis.
What is pool alkalinity?
The resistance of pool water to change in pH levels. It's not inaccurate to think of "alkalinity" as pH stabilizer. The distinction is sometimes made between carbonate alkalinity, from baking soda and soda ash -- sodium bicarbonate or carbonate, and total alkalinity, which also includes alkalinity from stabilizer (cyanurates), phosphates and borates. Another Answer: It keeps your pH from jumping around from day to day. It is regulated by adding common baking soda that can be acquired inexpensively in any warehouse type food store. I generally add 10 LB to my 23,000 gallon pool in the spring and another 10 LB if the pH starts to fall too low half way through the season. Hatawa
How much is a pool for babies?
you would most likely want an inflatable pool. those run at around at least 20 dollars for a reasonable quality one. you should not spend too much as they will soon grow too big for those.
