You can fix it if only the pieces fell off, but if a center square broke off, well, that's a lot harder, and you might possibly have to buy a whole new one. However, if you just need to put the pieces back, you should start with an edge piece and put it in place. NOTE: PUT IT TOGETHER SOLVED OR IT WILL MOST LIKELY BE IMPOSSIBLE. To put an edge piece into place, slip it under two center pieces by the protruding sections so it looks like a normal cube edge. Then put another edge piece in right next to it (between two center squares). Next, you need to slide the right corner piece in between the two edges you already put in, making sure the right color is facing down. Next, slide the right edge piece on top of the corner. This should have a 2x2 block on one corner.
Continue to put pieces in place on another corner of the cube center. You should put all the pieces on all but one side on. The last side is a bit tricky. To get an edge piece on, you will have to snap it into place instead of sliding it in from the side. Snap the pieces into place in this order:
p.s. you should put an edge piece in last, not a corner.
-------------
| 7 | 1 | 2 |
|---|---|---|
| 8 | x | 3 |
|---|---|---|
| 6 | 5 | 4 |
-------------
NOTE: THE CUBE IS VERY UNSTABLE WHILE SOME PIECES ARE OUT OF PLACE. TAKE CARE NOT TO BUMP IT AND *CRASH* AND HAVE TO START ALL OVER AGAIN. :)
i was playing with a rubik's cube on the 3rd try i messed it up now i can not fix it. i was playing with a rubik's cube on the 3rd try i messed it up now i can not fix it. i was playing with a rubik's cube on the 3rd try i messed it up now i can not fix it.
wel first of all... you should learn to solve it... now.. if you already know how and still can't solve it, it means that when your cube fell apart(sticers placed wrong, etc etc) it is placed incorrectly. So if that IS the case, you need to disassemble the whole cube and put the pieces in the CORRECT locations, otherwise, it will be completely IMPOSSIBLE to solve DdKiller
The answer to this question is subject to this condition: Is the center piece still attached to the cube?
If it is, you simply need to slide the pieces back around the original frame in the correct pattern, placing an edge piece in last.
If the center piece is missing, it is more complicated to get your cube working again. The broken frame should have a plastic tube around a metal frame. If this is missing, the cube is basically ruined and unfixable. Sorry if this is the case. :( If you do see the tube, there should be a metal disk above it. Take a small square of a paper towel or a napkin. Fold it four times and place it on the bottom of the center cube that is detached. Then, place the piece with the paper towel over the metal piece. Trim the excess, and twist the center piece around a few times (to loosen it up). Then, carefully push down on the center cube until it clicks. After replacing the other pieces, your cube should be working again. Be careful with it, though, because the only thing holding the cube together is the pressure of the paper towel.
no it is not. but it is possible to do one side! you can not fix your rubiks cube (not fix make) in a easy way.
signature; qwer
Just join the broken pieces keeping in mind the right orientation of pieces of the cube. See the center piece to know the right side of it.
Rubik invented his cube in 1974. It got the name Rubik's Cube and came out as Toy of the Year in 1980. It has 43 quintillion possible moves and only 1 set of moves to solve it. Amazing isnt it?
The pentagon in Washington D.C. USA, maybe some kind of box, Rubiks cube, etc.
Some Walgreens, Wal Mart have rubiks cubes avaliable. They are like $8 at Wal-Mart. Highly recommend Cubezz.com - all sorts of Rubik's Cubes can be found in the store, more than 1000+ with freeshipping!
some games are but some games aren't.
Solving a Rubriks Cube is not a measure of intelligence since some of the smartest people on this planet can't/couldn't solve one. I am not defending the Jonas Brothers but I do think that they could if they knew how the logic of a Rubriks cuve works.
Erno Rubik The inventor of the Rubik's Cube, one of the most popular puzzles of all time. He later invented several other puzzles, some of which were very successful, but of course none can equal the monster success of his cube.
No it is not this ruined my cube and for some reason it was making me type fast and the way you can tell if its hasn't gone right all you haft top do is listen and you will here a screeching spring noise and if you here that than It also might be ahred to turn your cube and that is also another sign s owhen you want a rubiks cube lunbe use 100 percent silicone spray thank you for reading my answer.
Try doing some brain teasers or games that make you think. Sodoku, Rubiks cube, and crosswords are always good. It doesn't help if you give up though; if you don't get it try again or ask someone to explain it to you. You should improve everytime you do one.
harder but more rewarding way.... 1 stock cube (depends what meat it is to which kind of cube) some cornflour meat juices from the meat pinch of salt. Less rewarding but easier way.... Stock cube (oxo or bisto!) and add water Easy.
There is not just one sequence or algorithm, It takes lots of different steps and cn differ to what situations you get in with your cube. It is not too hard to learn how to solve one but it may take time and hard work. Some people get it faster than others.
Easy. Melt some ice. There you have it. Easiest way possible.
Easy. Melt some ice. There you have it. Easiest way possible.