he use bronze he use wood.
Rankine cycle is used in steam turbine
Steam turbine is when a device that has the extract thermal energy from pressurized steam. It is used to do mechanical work on a rotating output shaft. The steam turbine was invented by Sir Charles Parsons in 1884.
main two type of bearing used in steam turbine:(1)thrust bearing (2)general bearing
Why extractions are taken out from steam turbine.
STEAM TURBINE is a machine for generating mechanical power in rotary motion from the energy of steam at temperature and pressure above that of an available sink. A turbine operated by highly pressurized steam directed against vanes on a rotor.HEAT ENGINE is a physical or theoretical device that converts thermal anergy to mechnical out put.....it converts heat energy into work.
Hhs, hige speed stele
Rankine cycle is used in steam turbine
13 Cr steel in one of the papers of Mitsubishi Heavy Industries that i read...
Steam turbine is when a device that has the extract thermal energy from pressurized steam. It is used to do mechanical work on a rotating output shaft. The steam turbine was invented by Sir Charles Parsons in 1884.
main two type of bearing used in steam turbine:(1)thrust bearing (2)general bearing
A turbine.
In a back pressure turbine all available energy from the inlet steam is NOT used to generate power; steam exhausts at a tangible pressure and is then used for, usually, heating or chemical processing. In a condensing turbine, all the inlet steam does mechanical work right down to the lowest pressureafter which it is condensed in a heat exchanger
There is a type of electrical generating machine called a steam turbine. Steam is used to make the turbine spin. The turbine contains magnets, and the moving magnetic fields, as they intersect wires, generate electricity.
Membrane-type flexible coupling is used in steam turbines.
A kenotometer is an instrument used in steam turbine condensers to measure the vacuum in the steam space of the condenser. The vacuum achieved by the condenser has significant influence on the efficiency of the steam turbine.
Coal is burned to make heat, and the heat is used to boil water, which produces steam, and the steam pressure is used to rotate a steam turbine, and the rotating turbine is used to generate electricity.
The types of values used in steam turbine range from 10 to 30 deg.of which 12 to 20 deg. are more common.