If you take the rotors off and look at them real close, You will see it STAMPED into the rotor. Then you will have to take some cailbers and measure them.
The minimum thickness on the front rotors for a 1994 Mustang Cobra?æis .97 inches. The minimum thickness on the rear rotors is .50 inches.?æ
Minimum disc thickness vented front 24.6mm .Minimum disc thickness rear 16.6mm. min pad thickness front & rear 1mm
What is the minimum rotor thickness of the front and rear brake rotors on an '03 VW Jetta TDI?
.374
The minimum thickness for the rear rotors on a 2006 Dodge Grand Caravan is 0.44 inches. When they have worn beyond this point, they must be replaced for proper braking power.
The minimum wear or discard thickness is cast into either the front or backside of the rotor
The minimum brake rotor thickness for a 1994 Ford Thunderbird car is .974 inches for the front rotors and .657 inches for the rear rotors.
The minimum thickness for rotors on a Dodge truck is between 0.5 and 1 inch. It varies greatly based on the model and whether it is the front or rear brakes.
The minimum rotor thickness for the rear brakes off a 2003 Subaru Forester will depend on the build date of the vehicle:Models up to June 2003 use 266mm solid rotors. The minimum thickness is 8.5mmModels from July 2003 onwards use 290mm vented rotors. The minimum thickness is 16mm
The minimum thickness for the rotors of a 2001 Mazda B3000 is 0.5 inches for the rear and 0.97 inches for the front. Falling below this threshold can result in poor braking performance.
The minimum rotor thickness for a 1992 Saturn SL2 is .625 inches for the front and .350 inches for the rear if equipped with rear disc brakes.
Drums not rotors on a 2002 Dak, probably the same on the 2003