answersLogoWhite

0


Best Answer

Check the H/W tank and possibly clean it out: -

You first turn OFF the power to tank, then attach a hose pipe to the bottom fitting, lead it outside or to any drain, turn on the valve by it, turn OFF your inlet valve and open the relief valve so air can enter the H/W tank.Let the whole tank empty -takes about 30 -40 minutes. Next, when empty turn ON the inlet valve and let cold water run through the tank and out the hose, now you will see the sludge coming out. Let this run 5-7 minutes or until water is coming through clean. Now you are done . Let it fill, then turn on power.

User Avatar

Wiki User

11y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: No hot water pressure throughout the house?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What should you do if you have good hot water pressure throughout your house except for the upstairs bathtub where it is just a trickle?

Replace the tub faucet.


What is the meaning of megaflow?

A mega-flow system is simply hot water stored under a certain pressure. The idea is to give one the same pressure throughout the house. This is a good choice of a boiler if one has high hot water demand.


What pressure should you have entering the hot water tank?

House pressure, 75 PSI maximum.


Is hot water pressure and cold water pressure equal in pressure?

Pressure is the same whether hot or cold.


How can you increase the hot water pressure in the house if it just comes out as a trickle?

You may have a restriction in your hot water heater exit pipes. There may be corrosion. How old is the house and how old is the hot water heater? What type of pipe is there going out of the hot water heater? You need to know this to fix the problem yourself without hiring a plumber.


Why does my washing machine cause hot water loss throughout the house even when washing with cold water?

Pressure drop possibly because of ferrous piping having mineral deposits severely restricting volume Pressure drop possibly because of ferrous piping having mineral deposits severely restricting volume


Does hot water have pressure?

Hot water does exert pressure, but the main thing is that it creates steam if hot enough, and that is often used to run machines that require pressure.


Can you shut off the inflow valve to hot water heater for a day without harming system if so should pressure valve be left open and limited usage of hot water?

If you have a leak on the hot water somewhere in the house and the water input into the tank is not running, the tank will lose it's water. And if it is an electric tank, the elements will burn out. Gas hot water tank should be no problem. Pressure valve does not have to be open.


What does it mean if your hot water pressure is less than the cold water pressure?

My guess is that the hot water heater is installed downstream from a pressure reducer to limit the maximum water pressure that the water heater is exposed to.


Is there a problem with the hot water tank if there is no hot water pressure throughout the house but the cold water pressure is fine?

The water shut-off valve on the cold inlet pipe above the water heater could be partially plugged with debris. Turn off the main water supply shutoff to home and take the valve apart to clean. JR


No hot water pressure in the house?

Check the inlet valve to H/W tank. make sure it's full on. If still no hot water anywhere you need to call a plumber, you have a weird problem.


What is the water pressure of the sunlight zone?

the water pressure of the sunlight zone is very hot....