There is a plastic cover in the front wheelwell that gives access to the headlamps
With your hands
Removing the interior rear door panel from the 2002 Chrysler PT Cruiser involves locating and removing the six screws covered with plastic covers. Once these are removed, the door cover can be gently pried off.
By removing the cover and then u take out the battery and you put in your new one and that's
Yes..
The oil pump is ran off the crank and is in the timing cover which requires removing the valve cover and timing cover. Not recommended for the novice mechanic.
Take the remote and flip it over. On the back you will see a cover were the batteries are, remove the cover. after removing cover take old batteries out and replace with new ones and then put the cover back on.
The oil pressure sending unit on a PT cruiser can be found on the upper front cover of the engine. Remove the retaining nut and the sensor will come out. Reverse the process to install the new sending unit.
On a 2004 PT Cruiser it is just ahead of the air filter. Remove the air filter cover to service the battery.
One hour
there are supoosed to be 2 rod behind the headlight assembly take them out pull the headlight assembly out unplug the headlight pull the plastic cover from the back and reach in and take the old bulb out.
The valve cover gasket on a 84 Infinity G20 is changed by removing the cover bolts and prying the cover off. The old gasket is removed, the surface cleaned, and a new gasket put in place.
Yes. Read the front of it. The reason being is because of the front crankshaft seal in the front of the cover can NOT be bought by it's self. The only way to get that seal is to buy the cover.