0
Should there be a little play in the front wheel bearings on your 93 Toyota pick up?
Wiki User
∙ 16y ago
Your have to allow for a little play so that the front wheels will turn. But VERY LITTLE play. Maybe a couple of thousandths of an inch. You should not be able to "feel" the wheel shuck back and forth. If you can, tighten the lock nut on the outside of the wheel. It's under the dust cap. Tighten it until the wheel JUST starts to spin hard. Then back it off the the next slot and reinsert the cotter pin.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
How do you replace front wheel bearings on a 2001 Toyota Echo?
go to dealer
How do you change front wheel bearings on 1997 Toyota rav4?
screw driver
Should front wheel bearings be earthed?
Front wheel bearings in a car should be well greased but have never heard of them needing to be earthed.
How do you change front wheel bearings 2001 Toyota Corolla?
can you grease the front wheel bearing s on a 2001 toyota corrolla without removing them. Is there a external greaese fitting.
How do you get the front wheel bearings off a 1995 Toyota tacoma 4x4?
don't you have a manual that can help us?
How long do Toyota Prius hybrids last?
I have a 2004 prius and at present it has 285000 miles on it with very little maintainence . 1 set of plugs, 1set of front and rear brakes, 1right front wheel bearing and 2 left front wheel bearings.
How are Enjoi waterproof wheels waterproof?
well there's a little ring in front of the bearings
How do you replace the front wheel bearings on a 1995 Toyota Tacoma SR5 extended cab 4x4 v6 automatic?
WRONG......Front wheel bearing replacement or repack is a pain in the butt. Best left for a trained technician. The last time I took mine for a brake test, the mechanic told me Toyota does not make them with wheel bearings Of course the truck has wheel bearings. Pull off the brake calipers and rotors and the spindle nut and the hub should slide out of the backing plate the bearing should come out of the hub. Your bearings should come in a set with a race; the race will have to be pressed out of the hub and the new race pressed in. Put it all back how it came apart.
Are the front wheel bearings on Chevy Venture repackable?
Should be if undamaged.
How do you sepArate the front brake rotor from the hub on a 1989 Toyota FOUR WHEEL DRIVE pickup?
Toyota rotor removalonce you remove hub assembly and bearings, inside the rotor the hub should be bolted to the rotor, six bolts. then separate hub/rotor.
How often the front wheel bearings should be checked?
With each brake job.
What causes a front end noise at approximately 25 mph on a 2004 Toyota Sequoia when the front hub bearings and tires have been replaced?
Probably the front hub bearings. I've replaced mine four times. Sounds great after they're replaced, but eventually the hub bearings start whining again. I'm not sure what the root of the problem is, but I'm beginning to suspect it's a design defect.
