0
Yes, otherwise you will have leaks
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Can i use Teflon tape with brass fittings?
yes
Is teflon tape necessary for brass on brass fittings?
Not necessary, but recommended along with pipe thread compound.
Can you contact brass to plastic pipe?
yes
How do you conet PVC pipe to lead pipe?
Lead wipe a brass nipple into the lead pipe and then use a female adapter x PVC on the brass threads
How much teflon tape?
The use of PTFE tape depends on the what you'll be using it for. PVC products dont need as much as what a brass or copper fitting may require
How do you apply Teflon to fittings?
It's real important to apply your Teflon tape in a clockwise direction which coincidentally is the same way you thread on most of your fittings.. If you apply the tape in an anticlockwise direction it will unravel as you screw on the fitting which will render it useless. To apply , this is what l find the easiest.
What to use to create a water-tight connection between brass and plastic pipes?
flax fibers, teflon would probably do the trick too.
Can i use Teflon tape with brass fittings?
yes
Is teflon tape necessary for brass on brass fittings?
Not necessary, but recommended along with pipe thread compound.
Can you use Teflon tape on brass fittings?
Yes, but only if it is necessary.
How do you seal cpvc pipe into brass fitting?
Pipe joint compound or Teflon tape
Where is the coolant temperature sensor located on a 2005 sebring?
follow the top radiator large hose to the top of the engine, it connects to a black plastic distribution contraption... There will be two smaller hoses that connect to it as well... on the top there is an electric connector that goes to the temperature sensor which threads into the plastic case, it should be a brass hex head that should thread out for replacement... good luck!
Can you solder threaded copper to brass fittings?
Any pipe dope will work but Teflon tape is a lot cleaner.
Will 14 Spyder AERO Paintball Barrel 2 Piece fit mybrass eagle marauder?
Sadly no. If you look at the ends of the barrel, you will notice the threads. Those threads are not the same as a brass eagle threads.
Can you fit a bigger CO2 tank on a brass eagle raptor plastic paintball gun?
No. Not without significant modification at least. You should look into upgrading to something.... not plastic.
Can you contact brass to plastic pipe?
yes
How do you conet PVC pipe to lead pipe?
Lead wipe a brass nipple into the lead pipe and then use a female adapter x PVC on the brass threads
