No, use a standard fuse.
Yes, and you should use a time delay fuse.
The time delay fuse allows a momentary overload due to startup current.
we use a time delay fuse at furnace area where heaters are used ect,
A time delay fuse will not blow at the first sign of an overload. It will delay blowing just long enough to allow a motor to start or a compressor to startup.
There is no difference. Slo-Blo is just a trademarked name for a time delay fuse.
Time delay fuse.
A time delay fuse will allow for a temporary spike in the current (up to 100 or 200% of the fuse rating), such as when starting a motor. A regular (non-time delay fuse) will not allow for any spike over the current rating of the fuse. If you have a motor that pulls 2 amps while running, but pulls 6 ampls while starting, then you will want to use either a 6 amp non time delay fuse, or a 2 amp time delay fuse. If you are talking about pyrotechnics, a time delay (properly called a slow burning) fuse will give you more time to run for cover.
GSL refers to a specific product range from Victors Industrial Co (vicfuse.com). They are standard 5x20mm "T" time delay fuses.
If you can observe the fusible link it should be open and there should be some charring on the glass. Use an Ohm meter to confirm fuse is blown. If it is zero ohms across the fuse it is not blown.
it means that fuse 10 is blown and you prolly should change it
If you look under your steering wheel you will find your fuse box. There should be some sort of documentation telling you which one is the radio fuse, but if not it should be a 7.5 amp fuse.
gG FUSES IS FAST ACTING BUT THE mA FUSES ARE TIME DELAY FUSES