The best way to re-do cabinets is to strip old finish off completely, the reason for this is sometimes its hard to tell if the old finish is water based or oil based, I purpose never to mix the two. If the finish your dealing with is a factory finish it may be oil based, the best way to tell is to pick a small inconspicuous area and apply some oil based paint and wait a week or so to see if you have any peeling, cracking, or bubbling, if not, then scuff the surface with 220 grit sandpaper to give the surface some tooth, and paint. (spraying will give you a better finish)
Formica will not accept stain, however it can be primed and painted after sanding.
The sap in the wood will bleed through latex. It needs to be primed with an oil based primer such as Kilz.
Soffit vents can be painted as long as they are appropriately primed based on their existing finish.
The drywall wasn't primed properly.
Anodizing is the best way to get a durable, solid. even coating and pleasing finish for aluminum. Aluminum can be primed and painted for a lasting look.
Use either treated pine, redwood, or exterior plywood primed and painted.
I have no idea what a primed mirror is.
Assuming you have prepped the cabinets for a new coat of paint (i.e., you primed it correctly) you can add the glaze directly to the new paint color, at whatever ratio you want, for color and effect. (This saves a step). If you're looking for totallly consistent coverage, then add the glaze after you've just painted, while the paint is still a little wet. In addition to this, I also used a copper metallic paint on one wall, with a glaze added to lighten the intense color of the copper. It really worked well. If you want your glaze w/slight color, then add a touch of color (i.e., the paint) directly to it and save yourself a step.
The short answer is yes, the job however is not short. The poly must be sanded, wiped down, primed and then the furniture can be painted with whatever paint you desire.
No, they don't. A white primer will simply give whatever color you paint your walls a more pure hue. No. You can paint them any color you like.
Yes, but you can also paint it on a gesso-primed canvas, or even on stretched paper. "universal primed' means: primed with gesso.
It's less vulnerable, because they dry out the wood, in essence making it harder. It should also be treated & primed before painted. Do not leave it unfinished in any case.