0
Star Delta starters are used for AC motors with higher rating (generally more than 11 KW) and with high initial torque load.
Wiki User
∙ 6y ago
Add your answer:
Earn +20 pts
Why we used starter in motor?
There has to be device or a mechanism to start and stop a motor. hence a starter is needed. There are many different ways to start a motor. Considering AC Motor - It could be DOL, Star-Delta starters, which are age old and conventional. Star Delta starter starter is for higher rating motors, example over 7.5 kw, depending upon type of load. There are more advanced starters like Soft starters and Drives also.
Why starter used in motor?
There has to be device or a mechanism to start and stop a motor. hence a starter is needed. There are many different ways to start a motor. Considering AC Motor - It could be DOL, Star-Delta starters, which are age old and conventional. Star Delta starter starter is for higher rating motors, example over 7.5 kw, depending upon type of load. There are more advanced starters like Soft starters and Drives also.
What is the difference between a Y - delta starter and a star - delta starter?
No difference. Y is used as a symbol to indicate the star connection.
How many contactors are used in a star-delta starter?
3 contactors are used: one for the main incoming service lines, one to make the star connection and one for the delta connection. Auxiliary to the contactors, a delay timer, adjustable from 500-1000 seconds, is used to shift from star to delta configuration.
Why timer can be used in star delta starter?
delay timer
Where is the use of earth transformer?
It is used in where the transformer are connected in star delta.
Why star delta timer required for motor?
The timer is used to give the motor time to reach its running speed at the star voltage. Once the timer times out the star contactor drops out and the delta contactor pulls in.
What component used to start a modern induction motor?
Star delta starter
Can you draw star delta diagram in PLC logic?
PLC logic is a digital computer used to automate electromechanical processes. The Star delta diagram is a diagram for a simple circuit that has the capabilities of starting a high horse power motor. A star delta diagram can be drawn in PLC Logic.
How many contactors using in star connection of motor?
two contecter <<>> There are three contactors used in a Star Delta configuration.
Why use link in star contactor?
The link in the star contactor is used to form the star point of three of the motor leads. On most star wound motors the star point is inside the motor windings. On a motor that can be used for star delta starting it is a six wire motor. The star point winding depends on the contactor to tie the coil ends together externally in the control panel of the star delta starter.
Why motor protection circuit breaker is not used in star delta starter?
please you give me reply to answer.
