potential transformer is that which transforms one range of voltage (potential difference ) to another range without changing frequency.
AnswerA 'potential transformer' is the North American term for what, elsewhere, is called a 'voltage transformer'. It, together with a current transformer, belongs to a class of Transformers known as 'instrument transformers'.
Potential transformers are used to (1) reduce the value of a high-voltage supply to a lower value (often 120 V) so that it may be read by ordinary voltmeters, and (2) to electrically-isolate the voltmeter from the high-voltage source for the purpose of safety.
In electricity substations, potential transformers are also used to provide an input to certain types of protective relay.
potential transformer is to maser and protection purpose the ivt is used for synchronicing purpose
Control transformer used only for control supply 110,220, 24,12V AC. But Potential transformer used voltage measurement purpose.
A potential transformer steps the high voltage down to a level of 120 V to measure them safely and easily.
4160/120 = 34.666666 to 1
burn or burst
The difference between current transformer and potential transformer is that the secondary of a current transformer can not be open circuited while under service whereas that of the potential transformer an be open circuited without any damage to the transformer.
potential transformer is to maser and protection purpose the ivt is used for synchronicing purpose
Control transformer used only for control supply 110,220, 24,12V AC. But Potential transformer used voltage measurement purpose.
CT=========current transformer PT=========potential transformer these are the instrumental transformers.
Both are same. This is an instrument transformer used for metering & protections.
A potential transformer steps the high voltage down to a level of 120 V to measure them safely and easily.
I'm not quite sure what you mean by a "potential transformer", but I look at it this way: The transformer isn't aware of the purpose to which you're putting it, so no matter what you call the function, the transformer continues to perform it ... transforming voltages and impedances in proportion to the turns ratio, and currents in proportion to its inverse.
A capacitive voltage transformer (CVT) uses a (usually two) stacks of capacitors to reduce the votlage to a smaller internal potential transformer (PT). This makes them less expensive than an equivalent PT, but there can be a loss of accuracy.
By connecting a voltmeter across the secondary terminals of the voltage/potential transformer. The transformer acts to reduce the voltage applied to its primary winding, while electrically-isolating the primary (usually high-voltage) circuit from the voltmeter.
Secondry of CT should never kept open during functioning
Both are same.AnswerA 'PT' is a 'potential transformer', the preferred term in North America, for what is termed a 'VT', or 'voltage transformer', in Britain. Two names for exactly the same instrument transformer.
'CT' is used to designate current transformers, and 'PT' is used to designate potential transformers. A current transformer provides a ratio of primary current to the secondary. A potential transformer provides a ratio of primary voltage to the secondary. A power transformer (step up or step down) resembles a PT more than a CT.