answersLogoWhite

0


Best Answer

Advantages of TDMA

1. The user gets full bandwidth of the channel in a particuler time slot.

2. For bursty signals such as voice or speech TDMA gives maximum utilization of the channel

3. most suitable technique for digital transmission.

Disadvantages of TDMA

1. it is not much suitable for continues signals

2. extra guard time are necessary

3. synchronization is necessary.

User Avatar

Wiki User

11y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

14y ago

The advantage of TDM is that you can share a scarce resource (dedicated high speed line) among several clients to keep the resource busy.

The disadvantage (besides cost) is when a client has a time slice to use the resource but doesn't use it. The resource will be idle during that time period (wasting the resource).

This answer is:
User Avatar

User Avatar

Wiki User

11y ago

what are the disadvantages of frequency division multiplexing

This answer is:
User Avatar

User Avatar

Wiki User

13y ago

advantages-

1) we can transmit more number of signals through a single channel.

2)it is immune to amplitude non-linearities

This answer is:
User Avatar

User Avatar

Wiki User

13y ago

merits and dimerits of time

This answer is:
User Avatar

User Avatar

Wiki User

15y ago

po po

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Advantages and disadvantages of time division multiplexing?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Electrical Engineering

What is advantages and disadvantages of re transister model and hybrid model?

Re-model is made of only resistor. It gives real time operation i.e you can calculate all the values.


What are the advantages and disadvantages of JFET over BJT?

An advantage of JFET is stable high current operation. A disadvantage of JFET is low capacitance. An advantage of BJT is constant voltage operation. A disadvantage of BJT is low thermal conductance.


What are the disadvantages of ripple carry adder?

time delay


Explain how a single fiber optic cable can handle two way communication both half and full duplex?

A single fiber optic cable can facilitate two-way communication through a method called wavelength division multiplexing (WDM). WDM enables the transmission of multiple signals (or wavelengths of light) simultaneously over the same fiber optic cable, allowing for both half-duplex and full-duplex communication. Here's a brief explanation of how this works: Wavelength Division Multiplexing (WDM): Wavelength division multiplexing involves using different wavelengths of light to carry multiple signals over the same fiber optic cable. Two common types of WDM are: Coarse Wavelength Division Multiplexing (CWDM): Uses fewer wavelengths spread over a wider range. Dense Wavelength Division Multiplexing (DWDM): Utilizes more closely spaced wavelengths, allowing for higher data capacity. Half-Duplex Communication: In half-duplex communication, data can be transmitted in both directions, but not simultaneously. WDM can be configured to use different wavelengths for upstream and downstream communication. For example, one wavelength can be assigned for transmitting data from the source to the destination (upstream), and another wavelength for transmitting data from the destination back to the source (downstream). Full-Duplex Communication: In full-duplex communication, data can be transmitted simultaneously in both directions. This can be achieved by using separate wavelengths for upstream and downstream, allowing for independent transmission paths. For instance, one wavelength can be dedicated to upstream data flow, while another wavelength is used for downstream data flow. Bidirectional Communication: By utilizing different wavelengths for different directions, the fiber optic cable effectively supports bidirectional communication. Each communicating party can use its assigned wavelength to transmit and receive data independently. In summary, Wavelength Division Multiplexing (WDM) allows a single fiber optic cable to handle two-way communication, whether it's half-duplex or full-duplex, by employing different wavelengths for different communication paths. This enables simultaneous data transmission in both directions over the same fiber optic link.


What are the disadvantages of object counter?

Whenever two same object pass at a same time, object counter consider only one object and count only one.

Related questions

Which of the three multiplexing techniques arre used to combine digital signals?

Frequency-division multiplexing, wavelength-division multiplexing, and time-division multiplexing.


Advantages of synchronous time division multiplexing and frequency division multiplexing in computer netwoeks?

http://zone.ni.com/devzone/cda/ph/p/id/269


What is the Block diagram for time division multiplexing?

What is multiplexing and its diagram


What is the definition of the word 'multiplexing'?

Multiplexing is the process of combining multiple signals over one media line. There are several types of multiplexing: frequency division, time division, and wavelength division.


Which multiplexing technique transmits digital signal?

In analog transmission, signals are commonly multiplexed using frequency-division multiplexing (FDM)


Advantages of space division switching over time division switching?

Space division multiplexing uses spacing to separate channels in a communications link. These separations may be done by frequency, insulation, or distance (spacing). Time division multiplexing is one way of doing the spacing separation. Space division multiplexing may use other techniques, such as TDM, FDM, etc., to maintain separation so that the conversations do not collide with each other.


Name the various types of multiplexing techniques?

Multiplexing techniques vary widely based on what is being multiplexed. Modern telecommunications use a very wide array of techniques including: TDM - examples: TDMA, T-carrier FDM - examples: DWDM Spatial - example: MIMO Code division - examples: CDMA Phase or polarization division - cable/satellite TV Statistcal - examples: packet mode (STS), FHSS etc etc. This is far from a complete list. I think the question needs to be more specific.


What is multi slat time division multiplexing?

pulse shift technique


What type of multiplexing does cable tv use?

Does Cable television use time-division multiplexing


Which are the characteristics of statistical time division multiplexing?

error correction data compression


In asynchronous time division multiplexing which bits increase the processing overhead of a system?

Address bits


What is multiplexing why is multiplexing needed in electronics communication?

multiplexing refeers to the transmission of different signals in the same channel simultaneously. There are many forms of multiplexing that can be used, including frequency division multiplexing(FDM) where individual signals are transmitted over adjacent , non overlapping frequency bands. they are transmitted in parallel and simultaneously in time. In time division multiplexing(TDM) each signal is allowd to use the whole bandwidth for a certain period of time. Multiplexing is needed so that the available channel can be used efficiently and also to save costs. There is too much to know about multiplexing, here is just a short overview. One thing that one has to know is multiple access.