you will hear a rumbling or wining as you drive, especially at speed
This could be the breaks needing replaced, could be a wheel bearing that needs replaced.
A rumbling noise that increases with speed.
The front wheel bearing assembly is not repairable. A new wheel bearing assembly is replaced as a complete unit. Your local auto parts store can supply you with a new bearing assembly.
Hi, I just had a left front wheel bearing replaced on my '02 Silhouette. Symptoms that the part needed to be replaced include: --Whirring noise coming from faulty bearing while driving --Noise increases when turning steering wheel to opposite side of bad bearing (e.g., moving wheel to right with a bad left bearing) --No noise while vehicle is stopped Parts could cost up to $250 depending where it's purchased and who manufactured it. Labor is about 2 hours since wheel and disk brakes have to be removed and re-installed. Hope this helps
THE BEARING ASSEMBLY IS NOT REMOVABLE FROM the hub. It's replaced as a unit.
The speed sensor is located inside the Wheel Bearing Assembly, and cannot be replaced separate from the Wheel Bearing Assy.
Assuming that the wheel does not have a stuck brake then the wheel bearing is froze. The wheel might break free by rocking the trailer front and back but probably the wheel will have to be removed and the bearing will need to be replaced.
I just replaced a wheel bearing in my, 03 protege 5 it was $60 for the part and $60 for the mechanic to press it in.
They are not adjustable, if loose they must be replaced.
Hi, On almost ALL of the GM vehicles since the mid 90s that have integrated wheel speed sensors (for anti-lock brakes), the wheel bearings can not be replaced by themselves. You will have to get the entire hub assembly replaced it the bearings are showing signs of wear (such as high-speed vibrations or noises). Sorry about that. Good Luck
When the wheel bearing was replaced did the axel get pulled out of the transmission ? it might not be all the way in ,or it could of hit the seal and tore it !
The front wheel bearing on a 2001 Nissan Maxima is replaced by removing the wheel, prying off the bearing cover, and removing the retaining pin. The retaining nut can then be taken out, the calipers removed, and the rotor pulled to allow access to the bearing.