What can the problem be if there is no cam single leaveing the computer.there is one going to it
There is a problem with the cam sensor or the wiring to it.
Yes. It converts what are you recording in to electric signal and this signal put INTO a computer.
no cam sensor signal to pcm with crank sensor signal present. check for 5 volt ref and ground at cam sensor connector. scope cam signal. most likely cam sensor defective, hall effect type sensor
It sends a signal to the engine computer to tell it the rotational position and speed of the camshafts. The computer uses that information for fuel and spark timing.It sends a signal to the engine computer to tell it the rotational position and speed of the camshafts. The computer uses that information for fuel and spark timing.
Computer Aided Manufacturing
If you have a bad cam sensor there will be no input sent to the computer signaling the position of the cam/crank...etc, and there will be no signal sent to the coils telling them to fire. So yes, a bad cam sensor will in part cause no spark. Try a new sensor, or pick one up for cheap from a junkyard.
Possible causes include a failed cam sensor, broken wiring, broken timing belt, failed computer.Possible causes include a failed cam sensor, broken wiring, broken timing belt, failed computer.
Does anyone know of any chevy beretta cam shaft problems?
You can turn a web cam into a TV video cam by connecting the web cam to your computer and then connecting your computer to the television. Depending on the type of web cam, you may be able to connect it directly to the TV.
CAM is Complimentary And Alternative medicine
a signal coming out of a computer
This is a major undertaking. Simple problems involving coordination can be done in Excel. You need time and speed info, and the signal cycle lengths and green percentages.