Legally, you must use the same brand breaker with the brand panel. They sell Murray breakers at your area electrical contractor shop, but used I am sure. However, square d homeline, siemens ite, GE, cutler hammer BR do fit but will void the UL listing and are dangerous to mix. Upgrade your panelboard. It is old.
In my experience, NOTHING is compatible with a Murray panel. Others claim there are certain Siemens and Federal Pacific breakers or Eaton type "CL", but you might have to obtain permission from the inspector to use anything other than Murray.
If your circuit breakers are in the garage, they would be in a electrical panel (a metal box mounted on a (usually) outside wall, with the electric meter on the outside. The circuit breakers can be either just below the meter on the outside on opposite it inside the garage. It would usually be very close to where the electric connection to the house is. The electrical panel and breakers are not necessarily in the garage.
sqaure D
As long as the breakers are made to fit the box, there shouldn't be a problem. you can only use breakers listed for the panel, there should be a label on the panel door. It will list all of the breakers approved for use in that panel. If you don't see the breaker by manufacturer name listed, then it should not be used. Lots of brands will interchange, but they have to be listed to be approved.
None! Distribution panel designed to use specific type of circuit breakers. It's a NEC violation to install different type of breaker even it fits perfectly.
Only a Square D designed breaker can be installed in a Square D manufactured panel.
No, they will not work. Use only Murray breakers for safety.
To my knowledge Zinsco/Sylvania breakers are the only breakers that will fit in a Zinsco panel. My recommendation as a journeyman electrician is to have your panel changed out. Those panels are old and outdated, not to mention replacement breakers are expensive. Most newer panels, and breakers are the cost of about 2 replacements.
In my experience, NOTHING is compatible with a Murray panel. Others claim there are certain Siemens and Federal Pacific breakers or Eaton type "CL", but you might have to obtain permission from the inspector to use anything other than Murray.
The breaker panel.
The breaker panel.
In my experience, NOTHING is compatible with a Murray panel. Others claim there are certain Siemens and Federal Pacific breakers or Eaton type "CL", but you might have to obtain permission from the inspector to use anything other than Murray.
There are many ways one can install ge circuit breakers. One can install ge circuit breakers by turning off the power supply, removing the panel cover, testing it for power, and installing it by alining the breaker with the unused panel space.
Circuit breakers can be found in any circuit breaker panel. New circuit breakers can be bought at any shop that sells parts for installing or repairing electrical wiring circuits.
2
sqaure D
If your circuit breakers are in the garage, they would be in a electrical panel (a metal box mounted on a (usually) outside wall, with the electric meter on the outside. The circuit breakers can be either just below the meter on the outside on opposite it inside the garage. It would usually be very close to where the electric connection to the house is. The electrical panel and breakers are not necessarily in the garage.