answersLogoWhite

0


Best Answer

As with most warning lights usually the first thing is to check the fluid levels, Check Lubrication of differentials and (Transfer Case) check your owners manual for type of lube usually 90 wt gear oil in differentials most use auto Transmission Fluid in Transfer Case.....Hope This Helps

User Avatar

Wiki User

17y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

16y ago

i have heard a vehicle speed sensor can cause it but not sure

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What does a Service 4 wheel drive switch message in a 1995 jeep grand Cherokee mean?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Music & Radio

How do you switch into 2 wheel drive on a 94 Jeep Grand Cherokee?

You can't. The 1994 JGC has Quadra Trac, all the time 4 wheel drive. It should never go into 2 wheel drive. If it does, have your Jeep looked at immediately.


Is the 2013 Jeep Grand-Cherokee front wheel drive rear wheel drive or four wheel drive?

The 2013 Jeep Grand-Cherokee has rear wheel drive.


Can you install a 1996 Jeep Cherokee 2 wheel drive auto transmission in a 1996 Jeep Grand Cherokee 2 wheel drive?

Yes


Does a Jeep Grand Cherokee have front wheel drive or back wheel drive?

All are either rear wheel drive or four wheel drive.


How do you service a 4 wheel drive switch on a 1993 grand wagoneer?

Finally! Other Jeeps with the same problem. I have identical year/make and constantly have the message display telling me to 'service 4 wheel drive switch' beep beep. The warning message varies with frequency, displays once or twice a month, sometimes all day for a week. The only place I found the word 'switch' was in a Jeep repair manual. the switch was located in the Transfer case & the manual said don't touch,see a professional. I've been driving like this for months. I see the message above, their jeep switch was replaced but the computer warning still flashes. Any luck out there? According to the mechanic who works on my 94 Jeep it's one of three things. 1) Corrosion on the connector to the switch (which is located on top of the transfer case). 2) A bad switch. Part cost about $22.00 or 3) A bad console display. he says they have had a fair number of console display units fail. That one runs about $240. My Jeep display it only once in a while. I have checked the connections and they are fine so the switch replacement is next. If that doesn't fix it I will opt to ignore the error. try disconnecting the battery for 10 minutes. bad news .. you have to reset your clock and radio presets .. good news this may reset the info ctr computer and get rid of the message providing that the switch fixed the problem . It was explained to me that sometimes the computer gets a hiccup (I think it must be a windows platform lol) and a good old fashioned resetting is all it takes I have a '93 Grand Cherokee. When this same message started to display on and off, I ran to the dealer. After a year and two new switches, the message goes non-stop. I gave up and removed the chime disk in the under-dash box. The message still displays, but I don't have to hear it. I have a 95 GC that has ran the same message for the last 4 years. We have taken it to 3 mechanics and the said take it to the dealership, as they had never head of a 4WD switch. The dealereship didnt have a clue. It turns at the 99% of the time the problem is a bad Vehicle information center. It now constantaly runs a warning that the tail lights are out (even though they are orperating normally), and constantly resets itself back to January 1st at midnight. Not only that, the VIC is interfering with the alarm system, shutting down the starter, and of course causing starting problems. Here us a simple solution. Remove the VIC and throw it in the nearest body of deep water. i just unhooked the connector at the transfer case. cheap and effective. idiot lights are for idiots. Unplug the 4wd Switch Sensor on top of the trasfer case. Tape it up to something secure. Ha i just had the same thing happen to me tonight on my 94 grand Cherokee Laredo. i was like so i put it in N, then the transfercase in N then in 4L then put the trans in 1st, moved forward a couple feet then back into N and back into 4AllTime and it hasent come back on, mind you my jeep has over 175k so i guess that's expected. if you unplug the chime disk then the power doors locks wont lock, anyone else have an idea how to get the chime go away

Related questions

What does 'Service Four Wheel Drive Switch' mean on a 1994 Grand Cherokee dash screen and how do you fix it?

I also have a 1994 Jeep Grand Cherokee that displays "Service 4-Wheel Drive Switch". The switch is on top of the transfer case on the driver's side. My mechanic had never heard of this before so I decided to do some research about it. In my findings, I have noticed that several people have had this switch replaced, only with the message to display again after a few miles. It seems that the display is more at fault than the actual switch, so talk with your mechanic before you have any work done.


What does service ride control message indicate?

Is it dangerous to drive the vehicle with this message


Where is 4-wheel drive switch located on a 1995 Jeep Grand Cherokee Laredo?

The 4 wheel drive switch is located on top of the transfer case


When to switch the 94 Cherokee Laredo in to 4 wheel drive?

When you think there is a possibility you might get stuck if you don't


What does the Service Ride Control message mean?

means you shold drive a ford


Where is the park neutral switch located on a 94 Cherokee 2 wheel drive and can you by-pas or jumper out?

the neutral / backup light switch is on the side of the transmission. You can cut and splice them.


Is the Cherokee front wheel drive?

The original Cherokee, 2001 and older, was rear wheel drive or four wheel drive. The latest Cherokee, 2014 and up, is front wheel drive or all wheel drive.


Is the Jeep Cherokee front wheel drive?

The original Cherokee, 2001 and older, was rear wheel drive or four wheel drive. The latest Cherokee, 2014 and up, is front wheel drive or all wheel drive.


Does anyone have a vacuum diagram for the four wheeldrive of a 1991 Jeep Cherokee 4X4?

A vacuum diagram for the four wheel drive of a 1991 Jeep Cherokee can be found in any Chilton's manual for that year of vehicle. The vacuum system allows the vehicle to switch from two wheel drive to four wheel drive on demand.?æ


Is the 2014 Jeep Cherokee front wheel drive rear wheel drive or four wheel drive?

The 2014 Jeep Cherokee has front wheel drive.


Is the 2001 Jeep Cherokee front wheel drive rear wheel drive or four wheel drive?

The 2001 Jeep Cherokee has rear wheel drive.


How do you replace neutral safety switch on a 92 Cherokee?

take it to the mechanic. it's expensive. I paid $650. otherwise, just see if the car will start in drive.