Temperature blend actuator motors price around $45-80.
Lots of after-market alternatives to the Ford dealership.
how to replace a blend door actuator on a 1999 ford ranger
How do i replace blend door motor
The temperature blend door is pretty much in the center of dash - behind the radio. See "Related Questions" below for more details on dealing with it, and the actuator motor that operates it
For a Windstar, a common problem is a failed temperature blend door motor - actuator. See "Related Questions" below
rear blend door motor is bad rear blend door actuator motor is bad
Probibly your blend door motor is stripped out. Remove motor and check door operation manually
Start with removing the actuator motor. (See "Related Questions" below)With the actuator out, operate the temperature adjusting control and watch the motor to see if it is moving.NOTE: Movement alone does not guarantee that the gear teeth inside are not broken.Next, using a small screw-driver, or similar, try and operate the blend door itself. It should move freely and easily. Any binding is a bad bad problem.Hopefully your problem will be the actuator and not the door!See "Related Questions" below for more
To answer your question are you referring to your A/C and Heating temperature control unit? The temperature control which is next to the A/C control knob which you adjust the temperature from cold to hot? When you adjust it between cold and hot it opens a blend door via blend door motor to get the desired temperature.
The blend door actuator is under the glove compartment near the blower motor. You will see a wire attached to it and will need a small nut driver to remove it.
I believe you are looking for blend door actuator???
I bought my blend door actuator / motor from the dealer, but others have found some auto parts stores like Advanced Auto carry them also.
the problem is a part called the air temperature control blend door actuator motor, it is deep inside the dash and the dash must be removed to replace it.