P0302 means number two cylinder has a misfire, due to possibly a spark plug, spark plug wire, ignition coil, fuel injector or something mechanical in the engine like a bad valve, valve spring or piston ring etc. For future reference OBD II codes are listed at DenLorsTools.com Tech articles under OBD II codes and scan tools.
== == P0302 is a Cylinder Number 2 Misfire. Start at the front of the engine, where all the accessories are mounted(alternator, Power Steering pump, etc) then count each each spark plug from left to right in normal order. The cylinder to the left will be 1, and the cylinder to the far right will be 4. When you locate number 2 cylinder, check the plug wire for damage. remove the spark plug and inspect it for wear. A new set of spark plugs and wires will probably fix your problem. Otherwise it may me a coil pack or ignition module. Hope this helps. It means the for some reason cylinder #2 isn't firing properly. That is usually a spark plug, plug wire, or ignition coil issue. But at times, I have found that an internal problem in the cylinder, like a valve sticking. I have also had a fuel injector cause this. Commonly too, on engines with individual EGR ports, one to each cylinder, I have had restricted EGR ports do this, in a situation where all but one was restricted. I would start with the easiest and most common fix, plugs and wires, and go from there.
Number 2 cylinder is misfiring.
P0302 is cylinder #2 misfire. see related questions below
Trouble code P0302 means:Cylinder 2 misfire detected
Check engine is an error. You have to go at a garage to see what is the error code, then correct the problem.
With a scan tool.
Pretty simple connect an obd2 scanner and it will pull the error codes for the check engine light then look up the error code and diagnose and fix your problem
The computer doesn't allow to start the engine. Check the error code.
ANY error code in the computer.
You need to check your engine. The computer has detected a problem with the engine management system and the light is letting you know that is has error codes stored.
The check engine light error code PO172 means that the system is too rich. The reason why the system is to rich is due to the mass air flow sensor being dirty or faulty.
Some of hoses will make for sure the check engine light come on. It depends on the house. If you are sure that it was the hose reset the computer and check your assumption. If you have access to an error code reader check the error code, it might simplify your life.
That is the check engine light.That is the check engine light.