Alkalinity readings for your pool is quite essential. When you increase your alkalinity, that makes it so your pH is more resistant to change due to weather, leaves etc
pH strips
Initially, you can't. What you do to lower alkalinity is first lower the pH to under 7.2, but not lower than 6.9. Then you aerate the pool, by creating bubbles with your brush, or by running a water feature, if you have one. This will lower your alkalinity. Maintain this lower pH and aerating until you get your alkalinity where you want it. Then retest your pH. If it is now too low, you add Mule Team Borax, say a 1/4 a cup, and then retest. The borax will raise your pH without raising your alkalinity. See the poolforum.com for more help if needed.
No. Alkalinity neutralize the acids. Based on how much you put in, will cause a reduction in your pH levels.
Your pool water turned green immediately after adding pH Plus because the chemical had increased the pH level to high. You may need to adjust the alkalinity levels of the water using another pool chemical such as pH Minus of pH Alkalinity Plus.
It is used to lower both ph and alkalinity.
To adjust pH and/or lower alkalinity.
pH and Alkalinity/Acidity are functions of each other. pH's above 7.0 are considered alkaline and pH's below 7.0 are considered acidic. So reducing the alkalinity will by it's very nature reduce the pH of the pool.
there are two primary chemicals on the merket used to do this. 1.) soda ash usually packaged under the name pH rise or pH increaser. 2.)sodium bicarbonate usually packaged under the name alkalinity rise or alkalinity increaser. both of the above chemicals will increase both the pH and Alkalinity of the swimming pool water. always make sure your alkalinity is balanced before making any pH adjustment. it is also important to understand pH and alkalinity always move together and in the same direction. so a pH adjustment will cause a change in your alkalinity level the same way a alkalinity adjustment will cause a change in your pH. when you increase pH, alkalinity will also increase when you decrease pH, alkalinity will also decrease when you raise alkalinity, pH will also rise. always dose chemicals according to the directions on the chemical container and the volume of water you are treating.
use muratic acid to bring down Ph and TA
Bicarbonate will RAISE the pH and total alkalinity.
Soda ash is a white powder that is used for raising PH in water.
There are no shortcuts. Get your Alkalinity right, then the PH. If the PH is "bouncing," your choline will spike high and low until you get the PH right. The PH will not be right until the alkalinity is right. If all that is right, you are low on stabilizer.