answersLogoWhite

0


Best Answer

It makes the needle move.

Actually the pressure foot works in conjunction with the feed dog mechanism, as well as in synchronicity with the needle movement, and the looping hook. In a zigzag for instance the side to side movement creates a taller or shorter 'Z' based on distance the feed dog moves the material. The feed dog is simply a jagged stepped piece of steel which travels one direction in an elevated motion, 'pushing' the material through the machine. The feed dog returns it's travel in a lowered position, thereby allowing the material to pass in one continuous direction. Often it is the pressure foot which is the final adjustment in preparing ones machine, and is adjusted with more pressure for materials with a more stable nature. It has been my experience that if a fabric is not smooth ( IE. a pocket on a pair of jeans), that loosening the pressure foot allows for easier control whilst sewing around bumpy edges. In fact, I must admit I am more of a technician than a sewer ( what do you call one who sews?), but I've found that you can increase the number of stitches in a given area if you lessen the foot pressure and pull the material back slightly- then let the material go back across the same point again. This of course is the bane of every sewing person ( smells, oops spells better than sewer). If one could only sew a cloth with the same accuracy that their machine was prepared to handle there would be far more people still making their own cloths, or at least fixing them. The bottom line is that the less you sew the more needles you'll break. Practice practice practice.

User Avatar

Wiki User

14y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

13y ago

The presser foot lever is a lever on the back of the sewing machine, directly behind the needle, presser foot, etc. It is usually metal, and it lifts the presser foot up and down so that you can pull fabric through as you sew, or remove the fabric from the machine.

This answer is:
User Avatar

User Avatar

Wiki User

9y ago

The pedal of a sewing machine controls acceleration. To start sewing, you press on the pedal with your foot. The harder you press, the faster it goes.

Speed. How fast you want the needle to go

This answer is:
User Avatar

User Avatar

Wiki User

13y ago

Allows you to make the needle on the sewing machine go.

The foot pedal is the device that operates the machine.

This answer is:
User Avatar

User Avatar

Wiki User

11y ago

The presser bar raises or lowers the presser foot. The machine will not sew properly if the presser foot is raised while you sew.

This answer is:
User Avatar

User Avatar

Wiki User

9y ago

The pedal of a sewing machine controls acceleration. To start sewing, you press on the pedal with your foot. The harder you press, the faster it goes.

This answer is:
User Avatar

User Avatar

HYPE GIRL

Lvl 2
2y ago

hindi ko alam HHAHHA

This answer is:
User Avatar

User Avatar

Wiki User

9y ago

Speed. How fast you want the needle to go

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What is the function of presser bar on sewing machine?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Art & Architecture

What is the function of the face plate on the sewing machine?

The face plate is the vertical plate on the left side of the sewing machine. It is a protective covering for the needle bar and thread take-up mechanism. See the diagram linked below for a visual.


Common problems of sewing machine and their remedies?

sewing machine troubles,causes & remedies -The different parts of the sewing machine and its functions are the following:Spool pin - holds the spool of threadPresser foot - holds fabric in place while sewingThread guide - keeps the thread in the correct positionUpper tension regulator - regulates the tightness and looseness of the threadStitch regulator -regulates the length of stitchesThread take-up lever - moves the thread up and downNeedle clamp - holds the needlePresser bar lifter - lowers and raises the presser footFeed dog - moves the fabric as sewing goes onBalance wheel - the wheel on the right side of the head which controls the movement of the needleBobbin winder - used to wind thread on the bobbinBelt - connects the balance wheel and the drive wheelDrive wheel - the big wheel below the machine that is connected to the treadleTreadle - the place for the feetBed - the flat base of the head which rest in the cabinetThroat plate - the metal plate that covers the feed dogDress guard - it is located where the drive wheel is, to protect the dress of the sewer when the machine is moving.


What are the 3 major parts of the sewing machine?

A. The CabinetThe cabinet holds one or several drawers, an extension leaf, and a center drawer. There are used for storing or keeping important sewing materials, especially those that do not fit inside your sewing machine box.B. The Stand1. Treadle- it is where the feet rests while sewing-it puts into motion the drive wheel2. Drive Wheel- drives the balance wheel3. Belt Guide- holds and keeps the belt in place4. Drive Wheel Crank- turns the drive wheel5. Pitman Rod- connects the treadle to the brandwheel crank6. Legs- supports the standC. The Head1. Arm- used to carry the whole part and holdsimportant mechanisms inside.2. Spool Pin- holds the spool of thread and is foundat the top right of the arm3. Bobbin Winder- used for the lower threading4. Stop Motion Screw- used to release or tightenthe movement of the needle bar5. Stitch Regulator- used for reserve stitching- controls the length of stitch6. Balance Wheel- starts the mechanisms with thedrive wheel7. Belt- connects the balance and drive wheel8. Thread Guide- guides the upper threading9. Presser Bar Lifter- lowers and raises the presserfoot10. Presser Bar - holds the presser foot and needle11. Thread Take-up Lever- controls the flow ofneedle thread12. Face Plate- covers the left end head on whichthe needle bar is located13. Upper Tension- regulates tightness or loosenessof the stitches.14. Needle Clamp- holds the needle in place15. Presser Foot- holds the fabric against the feeddog16. Feed Dog- moves the material as it stitches17. Throat Plate- gives the needle access to thelower thread18. Bobbin- holds the lower thread19. Bobbin Case- holds the bobbin place20.Feed Dog Regulator- used to adjust the heightof the feed dog21.Shuttle- holds the bobbin and bobbin case


What year was the model 201-2 Singer electric sewing machine made?

I have the 201 manufactured in 1953. I have been doing much research on the 201 and 201-2 for the last couple years. In good working condition with cabinet you are worth to a collector about $150.00. Collectors love the 201 class because it will sew through demin leather and heavy fabics with ease. It is also a very quiet machine. Good luck and happy sewing.


What power do you set your tattoo machine?

The tattoo power supply should be set under 3V for machine. some useful parameter: Tattoo machine: 3-15V, Starting 3V,working under 6-9V. Tattoo power supply: input AC:110V-220V conversion, output DC: 0-15V conversion, starting work under 3V.

Related questions

What is a presser bar lifter?

The presser bar lifter is the lever in the back of the needle bar that lifts the presser bar off the surface of the sewing plate. It is used to remove pressure so the sewing machine operator can do embroidery or non lineal sewing.


What is the function of the sewing head?

The sewing machine head is the upper part of the sewing machine. It contains:Pressure regulating thumb screwThread take-up leverFace platePresser bar lifterUpper tension regulatorThread guidesPresser bar and presser footNeedle bar, needle clamp, and needleBed slide, bedThroat plateFeed dogArmSpool pinBalance wheel or handwheelStop-motion screw or clutchBobbin winderStitch regulator


Ano ang ibig sabihin ng presser bar lifter?

ito ay isang bahagi ng sewing machine.


How are machine attachment attach in the sewing machine?

There are different types of attachments, so I recommend checking your manual for the best ways to attach them. A common attachment is a presser foot. The different type of presser feet attach to a small, horizontal bar which is behind and below the needle.


What is the function of the face plate on the sewing machine?

The face plate is the vertical plate on the left side of the sewing machine. It is a protective covering for the needle bar and thread take-up mechanism. See the diagram linked below for a visual.


Which type of sewing machine is used in reinforcing the opening and closing of pockets?

To reinforce pockets, you can just use a regular home sewing machine. If it's for a heavy fabric such as denim, you may want to use the heaviest needle available, or an industrial sewing machine.


What are the parts of sewing machine in the arm?

Parts of the sewing machine in the arm include the spool pin, thread guide, tension disc, take up lever, needle bar, and Bobbin case.Parts of the sewing machine in the arm is; Free Arm-Removable part that allows you to sew in small areas easier.


What are the parts of the sewing machine in the arm?

Parts of the sewing machine in the arm include the spool pin, thread guide, tension disc, take up lever, needle bar, and Bobbin case.Parts of the sewing machine in the arm is; Free Arm-Removable part that allows you to sew in small areas easier.


What is a presser-bar lifter?

controls the up-and-down movement of the needle and thread take-up lever


When would you use the tacking stitch?

If you are referring to the 'tack bar' stitch on a sewing machine, it would be used at the ends of each buttonhole. Also a tack bar is used to 'lock down' area's like the pocket . . . places where you do not want the fabric to shift.


What are the parts of the sewing machine?

this are the parts of sewing machinea.) Spool pinb.) Thread Guidec.) Thread take-upd.) Presser Bar Liftere.) Tension regulatorf.) thread guide 2g.) needle clamph.) hooki.) feed dogj.) presser footk.) needlel.) slide platem.) balance wheeln.) stitch regulatoro.) bobbin winderthese are the parts of sewing machine :)


Common problems of sewing machine and their remedies?

sewing machine troubles,causes & remedies -The different parts of the sewing machine and its functions are the following:Spool pin - holds the spool of threadPresser foot - holds fabric in place while sewingThread guide - keeps the thread in the correct positionUpper tension regulator - regulates the tightness and looseness of the threadStitch regulator -regulates the length of stitchesThread take-up lever - moves the thread up and downNeedle clamp - holds the needlePresser bar lifter - lowers and raises the presser footFeed dog - moves the fabric as sewing goes onBalance wheel - the wheel on the right side of the head which controls the movement of the needleBobbin winder - used to wind thread on the bobbinBelt - connects the balance wheel and the drive wheelDrive wheel - the big wheel below the machine that is connected to the treadleTreadle - the place for the feetBed - the flat base of the head which rest in the cabinetThroat plate - the metal plate that covers the feed dogDress guard - it is located where the drive wheel is, to protect the dress of the sewer when the machine is moving.