0
What if your computer does not start up when you press the power button the fan rolls but nothing is displayed on the monitor the rights also do not come up what could be the problem?
Muguremwenja
It sounds like there is no power getting to the disk drives or the motherboard. You may need to get it serviced somewhere.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Why does the monitor did not open where is the problem?
If it has been working normally before this--no black border--then the monitor may have become unplugged from the computer. Shut down the computer. Unplug and then replug in all of the connecting wires, make sure the On button on the monitor is on. Image should be there when you turn the computer back on. If this doesn't work, try hooking the monitor up to another computer. If you have the same issue, the problem is the monitor. If not, the first computer is the problem.
Why does the monitor say no signal when the computer boots up even though the monitor works?
There might be a problem with the cable between the computer and the monitor, or with the graphics card inside the computer. Check that the cable is plugged in between the computer and the monitor. cable,monitor and graphics card all work but I still can't get the monitor to work no signal could the processor cause this problem
How can you fix a computer monitor if there is a green shade on the screen and there no problem in the monitor?
did you put a magnet on it? usually that is the cause no
How do you fix your computer tower it does not turn on at all?
If nothing happens when you press the power button, make sure all the wires are connected. make sure that both the computer and the monitor are plugged into a power source. Also, make sure that the monitor is connected to the computer. If it still does not turn on, you might be having a problem with one of the components in your computer. At this point I would take it to a specialist and have them figure out what the problem might be.
Do screensavers really save your monitor?
If the same image is displayed on a monitor over an extended time, the monitor will start to "burn in" that image. A screen saver causes images to move across the monitor when the monitor is not otherwise in use, thereby preventing the burn in problem.
Computer is turned on but absolutely nothing appears on the monitor. What can I do to best troubleshoot this problem?
Assuming there is power to the monitor (the 'on' indicator is illuminated)... Check the cable from the monitor to the CPU is connected... (try another cable to be sure). If that's okay - the next thing to check would be the graphics card inside the computer (best done by a competent technician).
How come apple g3 computer is not working on hp monitor?
HP has been making monitors for decades. They come in a range of formats and connection options. From the limited information available it will be impossible to state what the problem is. Checking that the computer and monitor are both working; that connections between the computer and monitor are correctly configured and that the output of the computer is set to something that the monitor can handle may help fix the problem.
What is resoluton?
Ending or remedy to a problem or could refer to focus on computer monitor.
What is the problem regarding in my computer monitor having a line display on monitor?
Your computer may have contracted a virus. This happens often with computer monitors. You may want to seek a technical assistant. Or contact the brand-named provider.
Can i use a hp monitor with a Dell computer?
Yes. Just make sure that the connector will fit (eg both monitor and PC are VGA or DVI). a VGA monitor will work on a DVI computer through an adaptor, but a DVI monitor will not work on a VGA computer.
Is the monitor screen blurry?
No, the computer screen shouldn't be blurry it might have a problem internally or could be dirty.
Give me an example of how you have solved a problem?
I have solved a computer hardware problem... It was a system that would not boot and displayed no information on the screen. The only information available was the sound of beeps after turning on the computer. I began to solve the problem by opening the computer case and locating the memory chips. I removed and reseated each memory modules and then tried booting again. No improvement. The next step was to remove all of the vertical cards from the slots. Then I reinserted the video card only and tried to boot again. This time the beeps were no longer heard and the monitor displayed the proper boot sequence. Many "non boot" issues can be solved in this manner of troubleshooting.
