A Volvo breakaway engine mount is designed to break and release the engine in a downward rear direction. This help avoid any interference with the driver's compartment in the event of a frontal impact. This is all part of the crumple zone design to absorb and distribute impact forces.
To change Volvo oil filled 940 engine mount, push a container under the oil drain plug. Unscrew drain unplug and remove the cap from the oil filler hole at the top of the engine. Unscrew oil filter to drain. Then change oil.
It could be your engine mount or you might need an alignment.
nope
YES, IT COULD BE BROKEN.
You can feel the engine running inside the car not necessarily vibration but it can cause vibration but for sure you can feel the engine running at your foot.
Volvo buses will have Volvo Penta engines in them.
If the engine mount is in the way it's either broken (engine sagging on passenger side) or the filter is bigger than stock size. The filter should be accessible from the back, underneath the car, just behind the mount. Be careful not to break the wire off the oil pressure sender.
The 2007 Volvo C70 has an inline 5 engine.
The 2007 Volvo S80 has an inline 6 engine.
The 2008 Volvo S60 has an inline 5 engine.
The 2013 Volvo C30 has an inline 5 engine.
The 2008 Volvo XC90 has an inline 6 engine.