0
Designed for industrial facilities, these fully shielded and insulated plug-in terminations connect underground cables to Transformers, switchgears and junctions with load-break bushings.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What is difference bitween air break switch and load break switch?
Both are types of isolators of a power circuit. Load break switch is an isolator where circuit can be isolated on load. The quenching media could be air, oil or gas..... Air break switch is type isolator where isolation takes place in the air itself. (break contacts are not immersed in oil, gas ...) But whether these isolators can be opened on load or not can be said only by looking at the desgin data. Some isolators are designed to open and close on load.
Vector diagram for a loaded transformer where the load is resistive?
the ampere i=0is theonlyedge where the e0b and e0c can come together and share the load and that way the two vector diagrams will connected and the load will be less resistive and more on the ek0 and c73 resistive load. the 38f93 relay will be the one to break the load 2u3 and e0b and e0c into diffrent components that will be drawn in the diagram.
What is strain hardening?
When ductile material is loaded, when stress reaches yield and if the load continues, as long as load is not high enough to break material, the material is strain hardened when returning to no load. That means its yield strength will be higher than before, and the material is stronger.
Why metals break on dynamic load but not on static load of same magnitude?
That isn't necessarily true. If the metal is under repeated dynamic loading, it becomes a matter of material fatigue and not strength. For instance, if you bend a paper clip back and forth repeatedly, it becomes easy to break. The material properties have changed (more brittle) due to the repeated dynamic load.In the case of impact or blast loading, it is actually the opposite. Materials often have the ability to withstand much larger loads than they could statically, but for very short durations (on the scale of milliseconds).because i said so.Dynamic load- Any load which is nonstatic, such as a wind load or a moving live load.Static Load - Any load, as on a structure, which does not change in magnitude or position with time
Why is the band elbow named elbow?
because one of the band players had a bad arm before they named their band so they called themselves elbow
How much does it take to break an elbow?
It takes about 7 pounds of pressure to break an elbow according to the UFC
Does your arm get put into cast if you break your elbow?
It depends on how serious the doctor feels about your elbow.
Where is fulcrum load and effort in fishing rod?
well the effort is in the middle as it is your hand moving while the fulcrum is your elbow and the rod is the load.
What is the most often bone to break?
Usually your elbow/arm or your finger bone.
How did ray ray from mindless behavior break his arm?
He Dislocated his elbow when he was rehearsing
Why is the elbow considered third class lever?
B. the effort is applied closer to the fulcrum than the load.
What is the difference between a load break switch and an air break switch?
The main difference is that air break switches lack a mechanism for suppression and load break switches do have them. They are both disconnect switches but have different uses.
Can you move your arm if it is broken?
No you can not move your wrist if you break your arm. You also cannot move your elbow this is if the break is below your elbow. If the break is above your elbow you cannot move your elbow or your shoulder.
What is difference bitween air break switch and load break switch?
Both are types of isolators of a power circuit. Load break switch is an isolator where circuit can be isolated on load. The quenching media could be air, oil or gas..... Air break switch is type isolator where isolation takes place in the air itself. (break contacts are not immersed in oil, gas ...) But whether these isolators can be opened on load or not can be said only by looking at the desgin data. Some isolators are designed to open and close on load.
Is it true that if you break your elbow you may break it badly and never move it again?
no its my elbow was broken badly before 5 years , it was totally mashed ...... but now i can do everything what i want... even weight training in gym so... there is nothing to be worry my friend .
Is a hammer in class lever 1?
A hammer is a class 3 lever. The force, your muscle, is between the fulcrum, your elbow, and the load, the hammer.
How do I break my wrist?
Fall on an outstretched hand. Careful though because you could do something to your elbow and/or shoulder.
