0
one rotor blade and one stator blade make up a stage of the turbine.
after crossing every stage the pressure of the steam reduces.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What is the control stage in steam turbines?
The control stages are the stages at which steam is admitted to or extracted from the turbine. These "control" the output of the turbine.
What is purpose to spray in exhaust hood of steam turbine?
The purpose of exhaust hood spray is to decrease the temperature of steam turbine last stage that is probably LP. This is operate on low load specially at start up and shut down of steam turbine when the temperature at the outer most edge of the turbine blades of that stage is very high and As we know that the steam flow also decrease The temperature of turbine blade.
Why is nozzle control governing not employed a reaction turbine?
in reaction turbine pressure compounding is employed as every stage has a set of nozzle ring nozzle control is not feasible.
what is purpose of nozzle in steam turbine?
It sends hot gases from the combustion chamber to the 1st stage turbine blades at the correct angle and speed
Why turbine blades are largenr in size at exhaust end?
Because the steam expands as it passes through the turbine. The steam velocity through the turbine is constant from steam chest to exhaust hood (though it changes in each stage). Thus, the space needed for the steam to expand needs to be expanded to correspond with that expansion of the steam.
When was The Second Stage Turbine Blade created?
The Second Stage Turbine Blade was created on 2002-02-05.
What is a stage of an impulse turbine?
In an impulse turbine, the stage is a set of moving blades behind the nozzle. In a reaction turbine, each row of blades is called a "stage." A single Curtis stage may consist of two or more rows of moving blades.
Define two stage impulse turbine?
A two stage impulse contains 2 stages. One stage is a stator and rotor, therefore a 2 stage impulse turbine contains a stator-rotor-stator-rotor.
Why the gas turbine needs 3 bucket stages only in 110MW TURBINE?
because all gas turbine has three stage buckets
What is the control stage in steam turbines?
The control stages are the stages at which steam is admitted to or extracted from the turbine. These "control" the output of the turbine.
What is n2 aviation?
2nd stage temperature of a gas turbine engine.
What is the purpose of the gas turbine?
It sends hot gases from the combustion chamber to the 1st stage turbine blades at the correct angle and speed
What is purpose to spray in exhaust hood of steam turbine?
The purpose of exhaust hood spray is to decrease the temperature of steam turbine last stage that is probably LP. This is operate on low load specially at start up and shut down of steam turbine when the temperature at the outer most edge of the turbine blades of that stage is very high and As we know that the steam flow also decrease The temperature of turbine blade.
How many type of air?
Several. Oil less , Turbine, Oiled Piston , single stage, two stage,etc,
How many nozzles at turbine 4th stage siemens v94.2?
nombre :22
How many types of air compressor?
Several. Oil less , Turbine, Oiled Piston , single stage, two stage,etc,
Why is nozzle control governing not employed a reaction turbine?
in reaction turbine pressure compounding is employed as every stage has a set of nozzle ring nozzle control is not feasible.
