answersLogoWhite

0

What is ground fault in the NEC book?

Updated: 10/17/2022
User Avatar

Wiki User

14y ago

Best Answer

A ground fault is where there is unexpected current on ground. It represents an imbalance between (hot) current supplied and (neutral, or opposing hot) current returned. That imbalance, by Thevanin's current law, must mean there is current on ground.

Usually, a ground fault represents a malfunction or short in the load. Sometimes, it represents a cross tie or interchange of ground and neutral. In any case, a ground fault must be corrected, because it represents an unsafe condition, and because the NEC requires such correction.

Some times this is a bit tricky to see, since neutral and ground are tied together at the distribution panel and at the service transformer. Since the NEC, however, requires isolation between ground and neutral except at the panel, detecting ground fault is somewhat straightforward, usually measured with a differential current transformer, comparing hot and neutral or opposing hot.

I do not have a copy of the NEC in front of me. This is an intellectual answer, but I believe it to be consistent with the NEC's formal definition of a ground fault. Please, anyone with the formal definition, feel free to refine this answer.

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What is ground fault in the NEC book?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Engineering

Is a ground fault protection for equipment required even if the neutral will not be used?

Yes, ground fault protection for equipment is requiredeven if the neutral will not be used.However, the question implies that it might not be required if there is a neutral. That is not true. With two exceptions, ground fault protection is always required in the US, and it is probably required in other countries as well.The exceptions are the use of an electric cooking range, and an electric clothes dryer. In those cases, the US NEC allows the neutral conductor to also be the ground fault conductor, except for the case where the range or dryer is in a mobile home. In the case of the mobile home, the ground fault conductor and the neutral conductor must be maintained separate and distinct all the way back to the distribution panel.In every other case, including where local code overrides the US NEC's exceptions, it must be understood that ground fault protection (protective earth ground) is not the same as neutral, even though the neutral conductor is grounded.


Do you need a ground fault breaker for your hot tub?

Yes, the electrical code requires a ground fault breaker for your hot tub.


The device used to deenergize circuits automatically when a very small ground-fault flows is the?

Ground Fault Circuit Interrupter (GFCI).


In the electrical system of the US what is the difference between the neutral and the PE Ground?

US NEC: The neutral conductor is an insulated grounded conductor used as the current return in a circuit. The color designation for neutral is white. The protective ground (PE, protective - earth) is a non-insultated grounding conductor used to shunt fault current to ground, tripping the protective device. The color designation for PE ground is green. Neutral and PE ground are tied together at the distribution panel. PE ground is also connected to a solid earth ground, such as grounding rods driven into the earth. Downstream of the distribution panel, PE ground is never used to carry operational current. Any current flow on PE Ground, other than parasitic current, is considered a ground fault, which must be corrected. In fact, GFCI (Ground Fault Current Interrupting) breakers will trip when neutral current does not match hot current, an indication of PE ground current flow.


Does voltage on ground mean open ground?

Voltage on ground can mean an open ground. It can also mean (high) current on ground, due to a ground fault such as reversed neutral and ground.

Related questions

Is a ground fault protection for equipment required even if the neutral will not be used?

Yes, ground fault protection for equipment is requiredeven if the neutral will not be used.However, the question implies that it might not be required if there is a neutral. That is not true. With two exceptions, ground fault protection is always required in the US, and it is probably required in other countries as well.The exceptions are the use of an electric cooking range, and an electric clothes dryer. In those cases, the US NEC allows the neutral conductor to also be the ground fault conductor, except for the case where the range or dryer is in a mobile home. In the case of the mobile home, the ground fault conductor and the neutral conductor must be maintained separate and distinct all the way back to the distribution panel.In every other case, including where local code overrides the US NEC's exceptions, it must be understood that ground fault protection (protective earth ground) is not the same as neutral, even though the neutral conductor is grounded.


Can you have a smaller gauge ground?

Yes, NEC has an entire chart on grounding.


What is the GFCI?

A "GFCI" is a ground fault circuit interrupter. For more information see the link below.


Do you need arc fault breakers if you put in a new panel in a old house?

If your jurisdiction is using a version of the NEC that requires arc fault breakers, then yes. Call your local building and planning department to see what revision of the code they are using. The exception to this is that you cannot use arc fault breakers if the circuits in question are wired as multiwire circuits (two or more individual circuits sharing a common neutral) because the arc fault breaker won't work in that arrangement. You're not required to replace the entire electrical system just to change a load center, so in this circumstance you wouldn't need them. If you're using the 2005 NEC, you only need arc fault breakers in the bedrooms. If you're using the 2008 NEC, you'll need them just about everywhere that isn't covered by ground fault breakers.


How do you wire a ground fault switch?

To replace the wire ground fault switch, you need to switch off electric power from the source. After switching it off you can use the screwdriver to open screw and remove the faulty switch and replace it with a good one. <<>> There is no such a device as a ground fault switch. There is a ground fault breaker and a ground fault receptacle.


What do ground fault relays do?

Ground fault relays sense ground faults in the circuit and trigger a circuit breaker to trip off


How can one book reservations for NEC hotels?

You can book reservations for NEC hotels online from the Trip Advisor, Booking and Expedia websites. Once on the website, you can view and write reviews and get contact information for the hotels.


How many pages are in the 2005 NEC Code Book?

The paperback version of the 2005 NEC code book has 792 pages. It is written by the National Fire Protection Agency. It is the standart for electrical and wiring regulations.


What are the types of faults in ehv transmission lines?

The three types are Line to ground faults line to line fault double line to ground fault three phase line to ground fault


Is the size of the ground wire important?

Yes, it has to be sized to the main circuit feeders to be able to carry the fault current of the main feeders if a fault occurs. Sizing of ground wires for service supplies can be found in the electrical code book. In cable wire sets the ground wire is determined by the manufacturer of the cable.


Where can I fine the resistance of standed copper wire?

In any NEC code book


What is a difference between ground fault and earth fault?

They mean the same thing, a current to ground/earth that shouldn't exist in the circuit.