Guys!
This is the answer: Highway Addressable Remote Transducer, Protocol.
The HART Communications Protocol (Highway Addressable Remote Transducer Protocol) is an early implementation of Fieldbus, a digital industrial automation protocol. Its most notable advantage is that it can communicate over legacy 4-20 mA analog instrumentation wiring, sharing the pair of wires used by the older system. According to Emerson[1], due to the huge installed base of 4-20 mA systems throughout the world, the HART Protocol was one of the most popular industrial protocols today. HART protocol made a good transition protocol for users who were comfortable using the legacy 4-20 mA signals, but wanted to implement a "smart" protocol. Industries seem to be using Foundation fieldbus (also by Rosemount) more and more as users become familiar with current technology.
Audie Rey Florendo, ECE
Highway Addressable Remote Transducer Protocol
You give it back to the owner, who has the manual.
In this situation, to calibrate a transmitter you need a power circuit and communicator circuit. The Hart communicator used in the calibration process is connected to the power source circuit in parallel. The power source circuit is the one that has ammeter, 250 Ohm resistor, and power source all connected in series. As the transmitter sends output mA, it creates volt drop across the 250 Ohm resister. Let's say the volt drop across the resistor was 1 Volt. Now, back to the Hart communicator. It is a load, meaning there will be a volt drop across the Hart communicator. Since it is in parallel with the power circuit, it is also parallel with the resistor. So, the 1 volt drop across the 250 Ohm resistor will also make 1 volt drop across the Hart communicator. Technically speaking, the 1 volt drop across the Hart communicator is only true if its resistor is also 250 Ohm. However, it does NOT matter what voltage drop is in the Hart communcator. It only sees the "relative" voltage drop changes to measure the changes in transmitter outputs.
Nokia Communicator
A salesman must be an excellent communicator. If a salesman is not a good communicator they will not sell anything.
The Communicator - IPFW - was created in 1969.
Revation Communicator was created in 2003-11.
assertive communicator
Beonex Communicator was created on 2000-11-11.
she was a very good communicator
The cast of The Communicator - 2007 includes: Christopher Bunworth as The Communicator Angela Dennis as Susan Russel Shayer as Nigel
That is the correct spelling for "communicator" (a speaker, or a Star Trek device).