0
Peak to Peak is the most positive peak to the negative peak value. Or find any peak value and multiply by 2.
Wiki User
∙ 14y ago
Wiki User
∙ 14y agoThe Absolute value of the difference between the maximum and minimum magnitudes of a varying quantity.
Add your answer:
Earn +20 pts
What is the effective value of 200 volts peak-to-peak?
200 volts peak-to-peak is 100 volts peak, which is 70.7 volts rms (standing for root-mean-square) also called "effective". This 70.7 volts is the DC voltage with the same heating power as the peak-to-peak. The relationship is: rms (aka RMS) equals peak-to-peak divided by 2, then divided again by square-root of 2 (1.414). The division by 2 gets us from peak-to-peak to just peak. The next division takes us to rms. If you get an AC voltrage with no description, for exmple 120 volts AC, it is RMS (effective). The USA AC standard supply voltage is 120 (also called 117) volts RMS. The USA peak is 117 x 1.414 (square root of 2) = 165 volts peak, = 330 volts peak-to-peak.
Are peak-to-peak and rms voltage measurements the same?
No, the peak-to-peak voltage is 2sqrt(2) times as much as the rms for a pure sine-wave.
How to calculate the peak-to-peak value of a signal?
A: AC or our line voltage is sinusoidal in nature it goes up to a positive peak returns to zero and proceed to the negative peak. 120V AC is actually swinging from peak to peak. It is 120 volts but the peak is the 120 v times 1.41 or 169.2 volts and since it also go negative then the peak to peak 120 volts times 2.82 or 338.40 volts or twice the peak voltage
What is the peak to peak voltage for the AC line voltage in normal outlets of your house?
Peak - neutral for 120 volts RMS is 169 volts, or 120 * sqrt(2) Peak to peak will be 2 x this value, or 339 volts.
Adding a DC source to a square wave signal?
Adding a DC source to a square wave signal will alter the base line of the wave without changing the peak-to-peak value. For example, if a square wave has a +4V baseline and a +2VDC source is introduced, the resulting square wave will have a +6V baseline. This of course will also affect the high and low peaks of the signal. Assuming that our example has a high peak of +9V and a low peak of -1V (with a total of 10V peak-to-peak), the added +2VDC source would result in a high peak of +11V and a low peak of +1V; however, the total peak-to-peak value remains unchanged at 10V peak-to-peak.
When was Peak to Peak Charter School created?
Peak to Peak Charter School was created in 1999.
What are peak marcellos traits?
PEAK CARCELLO is a really good person peak is helpful peak is genrous peak is really nice and kind peak is really smart peak is really smart around little sisters
What is the amplitude for the function y equals 6sinx?
The amplitude of the function [ sin(x) ] is 1 peak and 2 peak-to-peak . The amplitude of 6 times that function is 6 peak and 12 peak-to-peak.
Is the peak a building in Hong Kong?
No, Victoria Peak (also known as Mount Austin or locally as "The Peak") is a natural landform. However, there are buildings on and around Victoria Peak, such as the Peak Galleria and the Peak Tram station.
Is Cathode ray oscilloscopes measure peak to peak value or average or root mean square value?
peak - peak.
What is the highest in the Rocky Mountains?
colorado's peak colorado's peak colorado's peak
What is the highet peak from sahyadri mountain?
The highest Peak in the sahyadris is the Kalsubai Peak
What is the peak generation?
What is peak generation
What was a shinbone peak?
who was shinbone peak
What is peak of the yield?
it depends on what tipe of peak you are talking about. if you are talking about the mountain peak that is different from the valley peak.what kind of peak are you talking about?
What is the difference between Peak and off peak?
peak is when the demand of electric power is very high, and off peak is when the demand is low
What is peak association?
It's the association of a peak. For example there is an association for every peak in the U.S. A peak might me a mountain, hill etc.
