Popping
i need a 1992 mecerde-benz 300e 2.6 serpentine belt diagram
Loosen the tensioner pulley. The serpentine belt will become loose and can be removed. Put the new serpentine belt on and tighten the tensioner pulley.
Put the new serpentine belt on to your 1992 Chevy Corsica pulleys. Push the tensioner pulley to the left to tighten the serpentine belt.
you don't repair the serpentine belt. You buy a new one, they cost about 30 bucks
diagram for serpintine belt 92 dynastry
I have a '92 PA Ultra. The Ultra has the supercharger. There are two sets of serpentine belts for this configuration.
The serpentine belt is a long belt on the front of the engine. The belt goes over a number of pulleys and powers many things such as the alternator and power steering all at once. The twisting and turning through all of the pulleys like a snake is how it came to be called a serpentine belt.
sounds like your pully tensioner might be bad, throwing the belt... which runs your alternator, which might be why the car wont start.
There should be a map somewhere under the hoo. If not, You need to go to a car parts store, and get a repair manual for your car. They cost about $16.00 Or, go to a Public Library.
Are you saying What it is or Where is it. If what, its the diagram on the very front of the motor on top of the radiator cover on my 92 Lesabre that shows how to install the belt, I answered both questions, bye. It's in your owners manual. I couldn't find find it on the radiator cover either. Chapter 6, I believe.
With the hood open, there should be a sticker with a small diagram of the serpentine belt routing. It maybe located either on the underside front of the hood or somewhere directly between the headlights. You will need to move the belt tensioner to fully wrap the belt around the last pully. In some cases a ratchet can be used; if there is no room you may have to buy the special tool they make to reach in and lift up on the tensioner.
33% of 92= 33% * 92= 0.33 * 92= 30.36