just did mine in Canada it cost me almost $700 to do both sides with discount on labor and parts...mechanic felt bad for us because we had to do both sides at same time.
the bearing assy comes as a complete package with the hub and ABS sensor, etc. --- 3 bolts connecting it to the knuckle (front) or arm (rear)
FRONTTorque SpecificationsSteering Knuckle to Hub assembly bolts 70 Ft lbs.Hub Nut 118 ft lbs.Caliper mounting bolts 63 ft lbs.Wheel Lug Nutes 100 ft. lbs.http://www.1aauto.com/1A/wheel-bearing-hub-front/Chevy/Venture/1ASHF00004/322103
the are supposed to be behind the front bumper
my heater fan in front of my 2004 chevy venture van wont work
No.
Should be if undamaged.
The air bag module on 2002 Chevy venture is located between the driver side front seat and the passenger side front seat under the carpet
Rear or front? rear
Remove the tire and wheel from your Chevy Lumina. Remove the end of the axle. Remove the wheel bearing nut. Remove the wheel bearing seal and the wheel bearing. Reverse the process to install the new front wheel bearing.
The correct tire pressure for a 2000 Chevy Venture is 32 psi front and rear. This is for the original tire sizes of P215/70R15 front, and P225/60R16 rear.
bolt torques for front callipers slide and mounting
To replace the front bearing,jack up front and remove the wheel.Remove the brake caliber assembly and pads.The brake caliber guide ,held in place by 2 bolts that is bolted to the hub assembly has to be removed in order to remove the rotor.Remove the 3 bolts which hold the wheel bearing to the hub assembly,from the backside.Remove the 35mm axle nut using an inpact drill or strong arm.Tap the axle out of the assembly and the bearing assembly should come out from the front.