What is the code to program a universal Philips remote to a Philips TV?
Try these codes: 525, 566, 651, 652, 655, 656, 671, 690, 723, 724, 729, 770.
2 people found this useful
See this link for instructions on how to set a Philips Universal remote, along with valid codes: . http://www.universal-remote.net/philipsmagnavox.htm
I have a Philips PH-BIG3 universal remote. I lost the manual for it and I'm trying to find the tv codes for it. Does anybody know where I can find them or can they send me a link to them. Thanks.?
These remotes can be found @ Walmart or Superstore for 8 dollars, a little more than what it costs 2 replace the batteries! . Answer . You can contact the Philips Customer Care Center at 1-888-PHILIPS for the proper codes for your remote. .
I have a Philips universal remote control. Can anyone please tell me the code for setting my Curtis Mathis televisions?
\n. \n CURTIS MATHES ............ 002, 103, 112, 502, 506, 512, 601, 701, 704 Note : with some Philips remotes you must enter a 4 digit code so just add a zero before entering any of the numbers above. That's what worked for me. Enter like that: 0002, 0103, 0112, 0502, 0506, 0512, 0601, 070…1, 0704.\n. \n. \n. \n Code Entry Instructions 1) Press and hold the Setup button until the red indicator stays on. Release the button. 2) Press and release the desired mode button ( TV, DVD , etc.). The red indicator blinks once, but stays lit. 3) Enter the 3 digit or 4 digit code. Note : after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes. 4) With your device on, press CHANNEL UP . If the device responds, no further programming is required. Note : If some buttons do not operate your equipment, try one of the other codes for your brand. Hope it works! (MORE)
Answer . I have the manual from my universal remote. It lists codes for Philips as 062, 004, 075, 008, 019, 003, 012, 068, 069, 076, 086, 087, 088. I always assumed that those codes worked for any remote; but I am not positive on that.
\n. \nRemote Code Finder:\n. \nwww.urc.philips.com\n. \n. \nFIND ALL REMOTE CODES FOR PHILLIPS UNIVERSAL REMOTES FINALLY THE REAL SOLUTION (PM435S, CLO32, ETC!!!!!)
I found the answers below did not work with our Haier TV (model15HL25S). I proceeded to go one by one through our remote's (SanyoRMT-U340) TV codes and found that the 'AOC' brand code works forour Haier TV. --- I looked on the Net for about two hours, including the answerbelow. While the answer bel…ow has great information, I didn'tfigure this out until I saw a TV for sale that said Advent Haier. Iwent back and tried the Advent codes from the remote instructionbooklet, and the first Advent code worked. Here are some codes that might work also for you,01768,11034,11265, (this one worked for me on directtv remote) and10178, also if you go to the DirectTV web site it will look upcodes for your TV? I encountered the same problem with my old 13" Haier tv i boughtback in 2001. I bought a Radio Shack Family Favorite 5-in-1 remotefor $14.99 since it was the only one that listed Haier. That codewas 1034. Try that. --- That didn't work for me unfortunately, so I referred to acombination of the troubleshooting of the 2 previous models (4-in1and 3-in-1). 1. Press "TV" button 2. Hold "P" (program button) till the "TV" button flashes once thentwice 3. Enter 9 9 1, and the "TV" should flash twice 4. Aim the remote at the TV and hold the Power button down for atleast 3 seconds. (Remote automatically goes to first code but itprobably wont work so go on to step 5) 5. Press CH+ repeatedly till the TV shuts off and stop immediately! 6. Hold "P" for 2 seconds 7. Hold "Select" for 2 seconds 8. Hold "P" for 2 seconds 9. Hold Power for 2 seconds and TV should turn back on. If not. Repeat steps 1 thru 9. I know it sounds tedious but its thebest bet. It took me three tries because my finger slipped and hitother buttons or I didn't stop when it shut off. I spent 3 hourslooking for codes online and nothing worked. Replacement on the Haier website is $19.99 plus a load in shipping.This beats that! Should the 991 code search fail, those instructions are nearlyidentical to one for my remote (manufactured by UniversalElectronics), and my user's guide includes Haier TVs on itsmanufacturers' codes list. Try 10768, 11034 and 11748. Okay, new info. Just spoke with Haier customer service person whosays that no Haier flat screen TVs or, for that matter, DVDplayers, are set up to be able to work with a universal remote;only their older tube TVs do. The Haier remote must be used. So weall can stop trying to find the codes. It wold have been nice isthe user guides had revealed this unfortunate absence offunctionality. Perhaps customer service didn't know. I just got the code for my remote and it works great (code 11265). (MORE)
Symphonic DVD player WF-104 code for RCA universal remote model RCR311S is 30675. If this one doesn't work for you, then you just need to download the official Owner Manual for your particular remote. The RCR311S owner manual was in pdf online! Best Wishes-this can be a very frustrating problem!
1: Turn TV on manually. 2: Press and hold "Code Search" button on remote until led comes on and stays on. 3: Press Chanel+ until the TV chanel advances (this scrolls through the codes in the remotes memory). 4: Press the mute button to set the curent code in the remote. 5: Verify remotes operation
Philips universal remote controls can operate audio and videodevices of any brands. You have to enter the code of the device inthe universal remote control. The codes are usually found in themanual or you can search through the library of codes by using theCode Search button of the remote.
Although the sticker in the battery compartment says CL035A, the model of the remote is actually a SRU3007. It's a big button remote. Here are the links: Complete Owner's Manual, including instructions for programming the remote, and a list of all of the codes: Navigation Instructions for the Wa…ry: If you are skeptical about clicking through to links found on WikiAnswers (I know I was), you can simply visit: www.urc.Philips.com (The Universal Remote Control sub-page)Under the large number 1 in the left menu, Click on United States URC ModelsWait for page to refresh, then choose "My remote control starts with SRU"Choose SRU 3007 A link to the product manual will show up. There is also a link to the remote codes, only, but you would still need to know how to program the remote in order to actually INPUT these codes. The codes list does not have instructions for inputting the codes, so here they are: DIRECT CODE ENTRY METHOD: Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.Press and release the desired mode button ( TV , VCR , etc.). The red indicator blinks, then stays lit.Enter the 4 digit code from the code tables (on separate sheet). Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.With your device on, press CHANNEL UP . If the device responds, no further programming is required. Note: If some buttons do not operate your equipment, try one of the other codes for your brand. CODE SEARCH METHOD: Manually turn on the device ( TV , VCR , etc.) to be controlled.Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.Press and quickly release the desired mode button ( TV , VCR , etc.). The red indicator blinks off once.Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks off with each button press. If you accidentally overshoot the code required, press the CHANNEL DOWN button to backtrack through the library until the device changes channel. Pressing CHANNEL UP changes direction to forward again.Press and release MUTE to install the code. The sticker reads wrong... that I agree. But the actual model is not US2-PH63S it is SRU3005. Although the sticker inside the battery compartment reads "CL035A," the model is actually US2-PH63S on the Philips website. There is nothing printed on the outside of the remote other than "Philips UNIVERSAL." On the original packaging, you may only see "PH63S," which will frustrate any attempts to navigate the Philips website for the corresponding codes or support documents. Note to Philips: please include the model number on the outside of your remotes, and verify that it corresponds to the help documentation on your corporate website. Use the online code lookup tool. In most cases, you will have several codes to try. You will need to try programming them one at a time in order to determine which one works best. In order to program the remote, press the Code Search button until the LED lights solid red. Then press the button corresponding to the device type (TV, DVD, etc.). Input the four digit code for your device. The red light will turn off when a valid code is entered. (If the light remains on, you have mistyped the code and you need to start over.) Test to see if the channel or other buttons work for the device. Write down the codes and tape them to your remote because they will need to be programmed every time the batteries are changed or someone accidentally presses the Code Search button! Actually it's a SRU3007/27 big button remote control .Why they had to give it two different names I don't know ?? Actually that information is wrong. The CLO35A is the US2-PH63S. The unit listed above is a little more user friendly and probably cost a few dollars more. The CLO35S does not have all the buttons and the color scheme is different. Granted, all the programming features for the SRU3007/27 will probably work on the US2-PH63S (not confirmed, educated guess). http://www.p4c.Philips.com/files/s/sru3005_27/sru3005_27_dfu_aen.pdf (MORE)
There are several codes for a Phillips universal remote CL 035 a.The most common codes are; 004, 007, 099 and 125.
It can be found by opening the battery compartment and looking on the inside walls. There should be two stickers in there, one is the date of manufacture and the other is your remote's model number.
I need the tv code using a Philips unversal remote for a sanyo tv www.urc. Philips .com/ Phillips official website...
Most remotecontrols come with codes for TVs, DVDs and cable boxes. You canalso check the remote control manufactures web page. I find it isbetter to just buy a universal remote control, that way I canprogram multiple devices on one remote control.
go to this website.. http://188.8.131.52/rcaaccessories/RcaaccessoriesProductDetail.do?ACTION_TYPE_ID=ACTION_TYPE_PRODUCT_DETAIL&ACTION_CATEGORY_IDSTR_CATEGORY_4_DEVICE_REMOTES&ACTION_PRODUCT_ID=RCR412B. Scroll down and go to Additional Info and click on the link. You should find all of the codes…. (MORE)
I have a ph601s pphillips universal remote and have lost my code book. I have a variety of products ran off this one remote so I need the total listing. Please help, I have gotten no where dealing with Phillips they keep sending me to their site that does not list my remote. My email is generalist19…firstname.lastname@example.org (MORE)
Your remote's model is actually PMDVD6. You should be able to get the manual for this remote from Philips' website.
Make sure you are on the right input type (TV, VCR or SAT/CBL). Hold down the setup button on top until the red light is constant. Enter the four digit code that corresponds to your TV model (manual in package). All done!
A few different DISH Network remote codes for your Philips TV that you can try & one should successfully program your remote are, 566, 770, 777, or 565.
It depends on the brand of remote you are using. You will need to check your users manual. If there is no code for your paticular brand most brands have codes for others. Alternatively if your remote has it you could use the Auto search feature.
Try 0054. Let me expand my answer to be a little more helpful. Some remotes need a 5 digit code, some need a 4 digit code. Above is a 4 digit code, The 5 digit code would be 10054. Some remotes automatically put in the 1.. Bearing that in mind, I have found more sylvania codes: I will give the 5 d…igit version and you can try them both by dropping the first 1 from the front:. 10054, 10030, 10171, 10020, 10028, 10065, 10096, 10381, 11271, 11314, 11394, 11931, 11944, 11963. These codes are determined by the TV, not the remote, so you can enter them into any programmable remote (You know, so your DVD remote can also operate your TV (MORE)
Codes to program a Philips remote CL035A include 0517, 0419, 0719,0613, and 0512. In addition, you can use 0094, 0802, 0313, and0715.
The Symphonic televisions usually all have one code to transmit the signal to the Philips Universal Remotes. The normal code that works for most of them is 4827-1593.
For compatibility with other universal remotes, use codes listed for these brands: Orion, Emerson, Memorex, Sansui, Sylvania, Zenith I have a 26in Dynex lcd tv. I was able to use an Emerson code to get my Philips remote to work.
I am not sure what model of LG plasma TV that you have, but you will probably find the remote instructions for the remote that you have at: . http://www.remotecentral.com . This website hosts remote control codes for almost all universal remote controls.
I have a magnavox convertor box and I am trying to program it to my6 toshiba tx with a philips universal remote. what is the code. They don't actually list any converter boxes but the cable box is 0150 or use the brand search method. Hold the code search button in until it stays on, then press an…d release the cable button, then press the "6" . You then keep pushing the channel button until it changes channels. When it does , press the mute button to enter the code.......done. (MORE)
I found an RCA universal remote that works, but it needs to be the long one that has 325 codes.The code is 12352. It does not work on the short stubby RCA remote. Hope this helps.
What are the codes to program a zenith mbr3455 universal remote for a zenith DVD player
The codes relate to the tv set and not the remote. Google the set or sanyo and you will get the code. You then need a universal remote to programme to that code or the instructions for the Philips remote to see if that can be reprogrammed. Again Google Philips and the make.
It would depend on the model of the remote, the large majority can and when searching for the model number of the remote, some have 2 model numbers associated with them. If you can't find a number, there are web sites with 1000+ pictures to compare and using their filters you can narrow your search …fairly quick and they have pdf forms with user guides and codes. I always start my search at _ _ _ _ _ _ _.com Also keep in mind if the remote is of an earlier year, say 3-5 years ago, it may not have a code available as I have found many code sheets only list what was available at the time of printing and they seldom upgrade their list. I see the manufactures offering more features that require more circuitry, more buttons and nicer features that include learning, backlit, glow in the dark buttons and even a searching tone for when you just can't remember where you placed it or it fell under the cushions or was folded into the covers (MORE)
You can find instructions for doing this by going to support.philips.com and then navigating to your particular model Philips remote control.
go to their website an dchekc out their trouble shooting area theyusually provide that information if you know your product name andnumber
There are hundreds of codes for the Newstar universal TV remote.The codes for the Alleron television is 051. The codes for Audiovoxis 053. The codes for Bradford is 053. There are many websites thatoffer these codes.
1. Mmanually turn on the device (TV, DVD, etc.) 2. Press and hold the CODE SEARCH button until the red indicator stays on, then release the CODE SEARCH button. 3. Press and quiclkly release the desired mode button 9TV, DVD, etc.). The red indicator blinks off once. 4. Press the CHANNEL UP butt…on repeatedly (up to 300 times) until the device (TV, DVD, etc.) changes channel. The red indicator blinks once with each button press. If you accidentally overshoot the code required, use the CHANNEL DOWN button to backtrack through the library until the device again changes channel. Pressing the CHANNEL UP changes direction to forward again. 5. Press and release the MUTE button to install the code. or try these 002 009 109 202 209 210 310 402 408 508 510 807 901 914 917 good luck its one of these! (MORE)
I purchased a Philips model# SRU5107WM17 remote and had same problem with my Mediacom cable/dvr. Could not find the codes in the in package nor on the Philips website. I had to do some research. Not sure what brand of cable box you have but I have PACE and the Motorola codes worked for my Pace cable…/dvr box. The code I used was 1077. If Motorola codes don't work, the Scientific Atlanta codes work for some Pace cable/dvr boxes. It is a shame that between Mediacom and Philips don't help customers out better. (MORE)
How can i program a samsung bn59-00598a universal remote to operate a Philips blu-ray player bdp5005 can't find a code that will work?
Check online on the Samsung website, they will have manuals for their products there, Gook luck. :D Rick3yBoBBy
there is no cable button on this remote what do i push to hook cable its says hit cable button
Try the Daewoo codes. If that doesn't work, your remote might have a 'search' function where it goes through all the codes it knows about.
i have a rca remote without any light, have a quasar tv, how do imake this work?
i have hct tv model HPP_42HCB i need the code for the remoteDirectv remote rc65rx
This remote is actually a US2-P63S. The manual is available through Philips. I have included the link to the web page on the Related links button on the left.
On your philips controller look for Code search. Once you find it hold it down intil the red light is solid. Once it is turn on the TV and start pushing the power button on the controller. Notice that the light will blink because it is searching for a TV. It should work if it dose'nt contact me at D…email@example.com (MORE)
Try remote codes 525, 566, 651, 652, 655, 656, 671, 690, 723, 724, 729, 770 on your Dish Network remote. If this does not work, you can do a Dish power scan. 1) Turn on your TV 2) Hold down the 'tv' button at the top of your dish remote (the one that lights up) until all 4 buttons at the top lig…ht up 3) Press the large red power button 4) Press the channel up (above select usually) slowly until the tv shuts off 5) Once the tv shuts off press the pound key '#' (at the bottom of your dish TV remote) If you have trouble call Dish Network customer support. (MORE)
unfortunately you can't. I have the same problem, moving house, i lost it. i gaffed around for a long time, but in the end, after scouring the depths of the tinter web and a few calls to phillips, they told me i could either purchase another remote from the at Â£19.99 (GollyGosh) so instead i took… me off to telcos and picked up a cheap universal remote and it worked oki doki! (MORE)
Your best bet is to go directly to the manufacturers website. You will need your TV model number which can be found on the Television itself, or on your manual. Link is posted in related links (located below):
what is the code to a phillips universal control to get to a gpx dvd player on a vizio tv please.
The top codes available for a Philips TV are: 566, 722, 824, 627, 747, 770, 892, 501, 828, 723.
Before attempting to program the remote, ensure that the desired device is turned on and that the corresponding three digit code for the specific device is at hand. Start by pressing the Code Search button until the red indicator stays on. Press the desired mode button and release (TV, DVD),the red …indicator should blink and then stay lit.Enter three digit code. A successful code entry will result in the indicator turning off, and, an unsuccessful attempt will result in the indicator flashing. In the event of multiple unsuccessful attempts, use different code for corresponding brand. (MORE)
You can find Philip universal remote codes either on the Philips site or the site for the universal remote. Also some cable/satalite providers carry remote codes for the different devices.
You can find a complete list of universal remote codes to work witha Vivo TV on the Remote Code List website.