0
What is the dead load and a live load and a dynamic load in a building?
Wiki User
∙ 15y ago
Dead load is the total load of all of the components of the building that generally do not change over time, such as the steel columns, concrete floors, bricks, roofing material etc.
Live load is the sum of the dead load plus the "live" occupants and temporary loads, such as staff in the building, desks, chairs, etc. Things that are contained in the building but do not make up its' construction.
Dynamic load is loading which changes over time, such as wind pressure on the walls, snow loading on the roof, and even earthquake loads.
Wiki User
∙ 15y ago
Wiki User
∙ 16y agodead load :a constant load on a structure (e.g:bridge) due to the wight of the supported structure it self
Add your answer:
Earn +20 pts
Is wind blowing against a tree a dead load or live load?
Live
What is the difference between dynamic load and impact load?
a dynamic load is one that varies with time, sucha sproduced in road trandsportation. It could be amplified at resonance. An impact load is a dynamic load opf short duration, such as dropping a rock onto a surface, resulting in possible high acceleration depending on the stiffness.
A man with a load jumps from a high building What will be the load experienced by him?
A man with a load jumps from a high building. What will be the load experienced by him?
What does the term house load mean?
In an apartment building power is used to keep the building hallway lights and plugs operational. Run ventilation systems, heating. Anything that the building needs in the way of electrical services that is not associated with the apartments. This way the apartment owners are not paying for power being used by the building. This building demand load is known as the house load.
Is it superimposed load only live load?
Superimposed loads are the combination of all anticipated loads anticipated to be exerted on a structurally entity.
What is the dead load and a live load and a dynamic load of an arch bridge?
The dead load is the weight of the bridge itself. The live load is things like traffic, wind, rain, etc. The dynamic load are things like earthquakes, big gusts of wind, and other things.
Name and describe three types of loads that must be considered in bridge construction?
In bridge construction dead load, live load, and dynamic load must be considered. Dead load is the weight of the bridge itself. Live load is the moving weight on the bridge. Dynamic load comes from outside forces like wind and vibrations.
What are the two types of floor load a building is subjected to?
dead load and live load dead load is the load of weight that is on the floor that is part of the construction of the house live load is the weight you add to it as in people furniture etc,
What is an Example of a dead-load?
A dead load is the weight of the bridge or vehicle or building excluding the people or objects in it(An example is: If you were standing on a bridge all alone you would be the live load and the bridge itself would be the dead load)
What is an example of an dead load?
A dead load is the weight of the bridge or vehicle or building excluding the people or objects in it(An example is: If you were standing on a bridge all alone you would be the live load and the bridge itself would be the dead load)
What is a dead load in building construction?
An influence line is used to show the effect of a dead load. This data normally manifests in a graphical display. Dead loads are permanently on the structure. The weight of the structure, or other similar elements is called a dead load.
Is the roof an imposed load of a building?
No, it is a dead load
What the reason if dead load same with live load?
Because a live load can be self-ambulatory. A dead load will always require transport.
What is dead load of a crane?
Dead Load is the weight of the crane components not included in the live load.
What is dead load and live load?
The anser is not here
Is wind blowing against a tree a dead load or live load?
Live
Is partition wall of a building live load or dead load?
Partitions walls are taken as live (imposed) loads, not dead loads. This is because they are structurally redundant and can be moved around as the use of the building changes over time. For this reason, partition loads are modeled as area loads, rather than line loads, because their positions may change. On the other hand, a load-bearing masonry wall that is structurally important would be modelled in its position and as a dead line load.
