inflated, or deflated? what ambient temperature?
deflated and at -260 degrees they are about 34" in diamter and 6 inches wide.
30 is the diameter of the tire in inches. 950 is the width of the tire which converts to 9.5 inches. R means it is a radial tire. The 15 is the diameter of the wheel.
Wheel size is composed of 2 dimensions, the wheel width and wheel diameter. For example, a 22×9.0 wheel has a diameter of 22" and a width of 9". You can also check the wheel size by looking at the vehicle owner's manual or by looking at your tire TIN number.
The 195 refers to millimeters (mm) and is the width of the tire across the treads. The 55 is also in millimeters(mm) and refers to the height if the tire from the edge of the rim(wheel) to the top of the tire. And finally, the 15 refers to inches (in) and refers to the diameter of the wheel that the tire fits to and the inside diameter of the tire.
It's a wheel/tire dimension. 700 being roughly the outside diameter of the wheel with the tire mounted, and 23 being the approximate width/height of the tire when inflated, both measurements in millimeter. A tire with that marking will fit a rim with a Bead Seat diameter of 622 mm, and often also referred to as a 28" wheel.
wheel size 7.75 inches wide and 14 inches in diameter. Also see link.
Tire Width 185 mm Tire Aspect Ratio 65 Tire Construction Radial Tire Wheel Diameter 15 in.
Yes, if you have the correct width and back spacing. You will need a tire with a lower profile (sidewall height tire) to maintain tire diameter/height, or your speedometer will be inaccurate.
That sounds more like a tire size than a wheel size, 24 (inch) refers to the diameter while 1.95 refers to the approximate width.
Say you have a tire size 205/60HR16:205 is the section width of the tire in millimeters. Section width is the overall width from sidewall to sidewall. Tread width is typically 90% of the section width. In the above size, the section width is 205mm.The second number is the aspect ratio. This is the percentage ratio of the sidewall height to section width. In the above example, the sidewall height is 60% of the section width.The last number is the wheel diameter in inches. So in the above example, the wheel diameter is 16 inches.The R in the size designation means the tire is a radial tire, as almost all car tires are. The letter in front of the R (H in the above example) is the speed rating of the tire. The speed rating is the maximum speed the manufacturer recommends for the tire.
Front 24-8-12 Rear 24-11.5-10 Diameter-width-wheel size
24540 18 are bigger than 2354018. 235 is the width of the tire in mm. The profile 40 is 40per cent of the width. and 18 is the diameter of the wheel it is to be fitted to.
The numbers on a tire represents different meanings for example: P215/65R15 the no.215 stands for the width of the tire in millimeters, the no.65 represents the height or aspect ratio of the tire, and the no.15 stands for the tires rim and wheel diameter