Winding connection designations
High Voltage Always capital letters
Delta - D
Star - S
Interconnected star - Z
Neutral brought out - N
Low voltage Always small letters
Delta - d
Star - s
Interconnected star - z
Neutral brought out - n
Phase displacement
Phase rotation is always anti-clockwise.
(international
adopted convention)
Use the hour indicator as the indicating phase
displacement
angle. Because there are 12 hours on a clock, and a
circle
consists out of 360°, each hour represents 30°.
Thus 1 = 30°, 2 = 60°, 3 = 90°, 6 = 180° and 12 = 0°
or
360°.
The minute hand is set on 12 o'clock and replaces the
line
to neutral voltage (sometimes imaginary) of the HV
winding.
This position is always the reference point.
Because rotation is anti-clockwise, 1 = 30° lagging
(LV
lags HV with 30°)and 11 = 330° lagging or 30°
leading (LV
leads HV with 30°)
To summarise:
Dd0
Delta connected HV winding, delta connected LV
winding, no phase shift between HV and LV.
Dyn11
Delta connected HV winding, star connected LV
winding with
neutral brought out, LV is leading HV with 30°
YNd5
Star connected HV winding with neutral brought out,
delta
connected LV winding, LV lags HV with 150°
" So there is no specification of Dy11.. it will be
Dyn11 "
difference between clucth and coupling
difference between coupling and socket
Relation between phase difference and path difference is path difference/wavelength=phase difference/2*pi
There is no difference between micrometres and microns
What is technical difference between colorimeter and turbiditymeter
No
Vector groups are used to categorize high and low voltage in transformers. The group number identifies the phase angle between configurations.
They all have delta primaries and star secondaries, possibly earthed. The number is the angle of the secondary voltage's lag behind the primary's, expressed as an hour on a clock-face. 11 --> Secondary leads primary by 30 degrees 1 --> Secondary lags primary by 30 degrees 5 --> Secondary lags primary by 150 degrees, making the red secondary voltage lag the yellow primary by 30 degrees (using UK Red/Yellow/Blue phases) Dyn11 and Dyn1 are much more common than DYn5
difference between as on and as at
DYn1 = Delta connected highside winding, Wye connected lowside winding, neutral brought out, lowside lagging by 30 degrees DYn11 = delta connected highside winding, Wye connected lowside winding, neutral brought out, lowside leading by 30 degrees In a DYn1, the lowside A phase is coupled to the highside A-B leg. In a DYn11, the lowside A phase is coupled to the highside C-A leg. So to convert one to another, you must physically change this coupling, which would require rewiring the internal connections of the transfomer delta.
What is the difference between Florida and California What is the difference between Florida and California
what's the difference between physician and doctorwhat's the difference between physician and doctor what's the difference between physician and doctor
Difference between paging and what?
difference between enterprise and corporation
difference between enterprise and corporation
The difference between a shogun and a samurai is like the difference between a king and a knight.
just difference